69 parts- What shape are the hood hinges in and how much would you take for them? In line for a friend:TU: ---------- Post added at 05:46 PM ---------- Previous post was at 05:45 PM ---------- Sending you a pm about the hinges..
Thanks for the pics Kimberly. I'm going to pass along your phone # to a guy in Ohio looking for a seat. Thanks again, Nick.
i need the cross brace for the core suport on the 69 if you still have it, and any crome left? i need three pices on the trunk and the two on the front fenders also hows the dash pad? and the bases to the hood scoops?thanks
Our 69 did not have the cross braces. I do have the BUICK trunk moulding listed in my store at http://www.ebay.com/itm/1968-1969-B...Parts_Accessories&vxp=mtr&hash=item19dba980c5 but have already sold the two end pieces. Are you referring to the fender eye brow mouldings?? No hood scoops and both 69 dash pads are cracked and are good cores. Thanks, Kimberly
Looking for complete rag joint for 66 skylark with power steering. The part that goes on the gear box and steering shaft. Thanks Scott
I know you have said the 66 quarters are bad. Could you post pics of the passanger side one. The upper portion of the quarter. Maybe I could patch in the upper since that is the piece I need. Thanks, Todd
For the 1965 Buick Skylark Convertible. Looking for the 14 inch arm rests and plastic/chrome support which fit on the interior side of the doors. Both passenger and driver sides Color not important. Also lost the ring/collar on the steering column below the steering wheel and between the shift lever. The part I need is between these two items. Please don't ask how I lost it.. It is embarrassing enough that I have been working on it since August. Thanks Located in Atlanta Ga
I don't have a 400 engine. Thanks, Kimberly ---------- Post added at 07:04 PM ---------- Previous post was at 07:02 PM ---------- Sorry OJ. I will be more careful. Kimberly
I do not have the arm rests that you need but here is a pic of the part that you do need. PM me if your interested. Thanks, Kimberly
Any chance you'd cut the inner and out rockers out of it? Mine are crushed near the back of door to the wheel well. I don't need the quarter panel section. I can send you pictures in an email if you'd be willing to cut them out.
Send me some pics and I will see what I can do for you. I am assuming that you are talking about the 66 right?? kdfarmclassics@gmail.com Thanks, Kimberly