65 STUFF taillights if not pitted. working console tach tinted glass,only need a couple pieces to complete a set tilt floor shift steering column hood emblem if not pitted
I just sold the taillights and the Hood emblem letters that I do have are missing studs. What pieces of tinted glass are you needing??
I 'm sorry but I should of stated that the 65 and 69 Custom are 4 doors. I did change the ad. ---------- Post added at 01:07 PM ---------- Previous post was at 12:59 PM ---------- Sorry but I should of specified that the 65 and the 69 are 4 door. ---------- Post added at 01:08 PM ---------- Previous post was at 01:07 PM ---------- Which one are you interested in the quarter patches for???? ---------- Post added at 01:15 PM ---------- Previous post was at 01:08 PM ---------- I just sold the taillights and the Hood emblem letters that I do have are missing studs. What pieces of tinted glass are you needing??
How do the doors look on the 66, most interested in the driver door, but possibly both? Was it a auto or 4 speed car? If 4 speed, is the short console and/or consolette still there? Since you listed them as Skylarks, I assume the 66 doesn't have a 401 sitting in it, if the motor is still present. If so, might be interested in that as well. Thanks!
There was a running 300 in it and as soon as I got the car home someone bought it!! It was an automatic. I will take some pics of the doors and post them in a little while. Thanks, Kimberly
Tony, The radiator support and right inner fender have rust through under the battery like most of them do and the right fender doesn't have any rust through but does have some old body repair in the front by the headlight area. If your interested I can send some pics. Thanks, Kimberly
What tail light lens does the 69 have? I am looking for the right side lens with the dual silver stripes on it. Also do you have any of the hood letters for the 69? Thanks
Does the 65 Skylark have wheel opening moldings? I would be interested in all of this, Wheel opening moldings Dash pad if not cracked Center emblem in between the tail lights i both upper and lower tab is intact. Also is any of the 300's have a 4 barrell intake? I need one of those. Thanks. Brian
The 65 didn't have any wheel openings moldings. I sold the dash pad already and non of the 300's had 4 barrel intakes. I do have the center emblem but there are some pits. If you want the emblem you can have it for $30.00 plus shipping. Thanks for your interest, Kimberly
I may be interested in both front fenders off the 65 if they are not rusted, dents are not a big concern.
I have a good right side lens without the stainless strips. I do have the hood letters for the 69. All the letters are really nice except for the I. Thanks, Kimberly