Bought L and R chrome outside door mirrors for a 72 Skylark from you a while ago. I need the black plastic gaskets and pass side mounting bracket, and another drivers door remote chrome mirror (VG condition). Do you have any of these parts?
Russ, pm coming to you. Craig, we have a driver quality driver side mirror, but not VG. We will look for the gasket and mounts and let you know. Thanks everybody.
Looking for a set of 14x6 rallys, driver quality. I'm located in Lovington,NM and pass through Ropesville quite a bit on my way to Lubbock.
Richard, Thanks. I wish I was as close to Boca Raton as I am to Ropesville! Carmantx, Once I get this second post up I can send you a PM.
Did one of these cars have the long floor mounted center console? I am looking for all of the mounting brackets for the horseshoe shifter and console. What I would like is to have the whole top area with all console and shifter mounting holes cut out as one piece so I can mark my xmsn hump and then transfer the brackets to mine and drill the holes. Thank you.
Jeff, we may have some 72 bezels, but they would be driver quality at best. Leo, no 455 fan shrouds. We got one from a big buick car for ours. John, We haven't bought a car yet that has had a factory console. Thanks for checking with us. Let us know if you need anything else.
Mark, Do you have any '71 power steering cars, early build? I need the side cover from a '71 with a date code of 007 1 or earlier. I'll buy the whole box as a scrapper & you send me only the cover.
I have several 10 bolt rears, don't know any of the ratio's and none are posis. Steve, yes I have a 71 power steering car. Don't know the build. So, where is the build date? Do I need to pull the box to find it?
No need to pull the box. Looking at it from above you will see the aluminum 4 bolt cover facing up.There is a small flat area with the date code stamped on it.
348 0 is only 24 days prior to 007 1. Consider it sold. Send me a PM once you get it apart & ready to ship. Thanks.
Steve, I live in Maine also. I work in portland and live in winthrop (10 mins from augusta), so I could pick them up in portland and get them as far as augusta.
Mark, I need a couple items for my 69. I'm looking for the inside actuator for the door latch. It's the peice the door lever attaches to and is held to the door by 3 bolts right behind the arm rest. I need the drivers side. 68-72 are all the same. I also need the right side verticle chrome strip on the rear side glass that holds the weather strip where it meets the passenger door glass. Jim.
We have no internet at home, due to the rain, about 8 inches this week from the hurricane remnents. Our average is 11 per year. Internet might be down all week. Email me at mark@texasextremeracing.com and I can respond better. I'll PM ya'll also. Steve, I'll get that section pulled for you this week and on the way. Kelly, I don't have a good, complete engine harness. I have pieces. I recommend going to www.wiringharness.com and getting a new one built by M&H. John, 4 metal buckets, yes, I have plenty good, non rusted ones. Jim, I'll have to check on the chrome, but I do have the door actuator.