Starting to part this guy out.Afew parts I've taken off.rear markers $15,rear window corners(egg shells) $12,long arm rest backing plates with mounting tabs driver quality $10,rear ash trays,distributor is 69 350 4 bbl code $10,rear back up lite housing is broken around the light mounts but good lense and brackets $15,pre heat tube is nice not bent shape $15, 2lh 1 rh nice driver quality $10,radio bezel nice and straight $20.rear speaker with hardware and wiring(was cut) $10,front bumper rubbers $10.Lots of other trim ,under hood and interior ,please post with wants and I will get back to you with pictures and prices.These are all plus shipping,most small stuff should be about $7.50 to $12...........Cole
2 things how a bout the grille? just need the plastic part,bottom of grille that fills the gap between bumper. I want to make custom grille and need this peice to finish off bottom. dont care if the rest of grille is broken. And , wiper arm transmission, and arms, hidden style. Thanks Darrell
Hi Doug How are you?Shipping would be $8 for a total of $23.I also have another set that are in need of attention 1 housing is cracked,the other has a melt spot at the light socket,good surrounds ans "Custom" scripts.$10 for those.If you wanted all 4 shipping would be $12 for a total of $37
Hi Darrell Here is a picture of the only piece of grill left.It does have the complete hidden wiper assembly intact.What pieces exactly were you wanting?........Cole
Hi Jim I think I remember now that you'de asked me about a rear speakerou: To you it would be $15 including shipping..........Cole
From the picture & of the dash, kinda looks like a small crack & on the far driver side ??? Looking by the pillar post & behind the wire, that is hanging there & by the VIN # plate ! Would this have, sail panel lights Or center dome light ? Would this have, the bottom lip trunk trim ? :TU: , Jeff
Cole all is good here, hope its the same there. i will take the ones for $23. let me know how you want $$. :TU:
Hey Jeff here are more shots of the dash. dusty as hell but No cracks.The car has sail panel lights and here is the trunk trim.Its got a small crack,flat spot, looks OK as a driver trim not very pitted and all attaching studs are intact,I should have the quarter extention trim as well...........Cole
Hey Cole, Will you be selling that carb? I am guessing it's a 7029244. Also, if you ever decide to part out the motor, I may be interested in the pistons if they are original hi-comp, and in good shape. Best Wishes,
Hey Cole, Will you be selling that carb? I am guessing it's a 7029244. Also, if you ever decide to part out the motor, I may be interested in the pistons if they are original hi-comp, and in good shape. Best Wishes, <!-- / message --><!-- sig -->__________________ Joe M. Joe.M; I regret to inform you that I have dibbs on the intake & carb already...it is pending,should the sale fall through you are next in line. Best Regards, 455nGLIDE
Hey 455nglide, I don't see where that arrangement is mentioned in this thread - until your post which comes after mine. The parts appear in the pictures along with the "please post wants" in post #1. It's a board rules thing, but I suppose we'll have to see what Cole says about prior arrangements. Best Wishes,
Hey 455nglide, I don't see where that arrangement is mentioned in this thread - until your post which comes after mine. The parts appear in the pictures along with the "please post wants" in post #1. It's a board rules thing, but I suppose we'll have to see what Cole says about prior arrangements. Best Wishes, Quote: <TABLE cellSpacing=0 cellPadding=6 width="100%" border=0><TBODY><TR><TD class=alt2 style="BORDER-RIGHT: 1px inset; BORDER-TOP: 1px inset; BORDER-LEFT: 1px inset; BORDER-BOTTOM: 1px inset">Originally Posted by 455nglide Hey Cole, Will you be selling that carb? I am guessing it's a 7029244. Also, if you ever decide to part out the motor, I may be interested in the pistons if they are original hi-comp, and in good shape. Best Wishes, <!-- / message --><!-- sig -->__________________ Joe M. Joe.M; I regret to inform you that I have dibbs on the intake & carb already...it is pending,should the sale fall through you are next in line. Best Regards, 455nGLIDE </TD></TR></TBODY></TABLE> <!-- / message --><!-- sig -->__________________ Joe M. Joe M., I apologize for that...sent Cole a PM last night and neglected to post anything, my bad and no excuses offered. As a gentleman and boardmember respectfull of my peers here I too offer up the decision to Cole... I did not mean to make waves. Best Regards, 455nGLIDE