Where do I find a Z-bar/flywheel

Here's a two fold question. First, where is everyone getting the z bar assembly from, I know that there is bound to be someone out there that didn't use one from a Gm A-body. I would think that a pontiac or Olds would be a close enough match that it should work.

Second, can I reuse my stock th-350 flywheel when swap up to a super t-10?

P.S
Is there anyone on the board yet that has managed to do a converison and used a hydraulic clutch assembly instead of the old cable jobs?

Thanks in advance
Tunerz

 

go to www.buickperformance.com to see Dave Kliener's repro 4 speed parts which includes the z bar.

 

I know from experience that the pontiac one does not fit,bolt pattern is different,at least that what i found with my 67 -430 thats going into the wagon...(by the way i have a pontiac flywheel for sale ou: )

 

Oh really? What size is it and is it aftermarket or OEM?

 

the pontiac flywheel was a late 70s' off of a trans am, 11" oem as far as i know,it just wouldnt line up with the 430 crankshaft bolt holes ,i purchased a "buick" flywheel off of a board member and it fits fine,i really had thought the pontiac one would fit.. but the bolt pattern while similar was slightly larger

 

I have a z bar and a flywheel from a 350 Gs anda z bar from a pontiac both 71

 

If you're looking for a Z bar from a 350 I have 3 or 4 of them I found in the local wrecking yards over the years.

Brian

 

hi, year one has flywheels for buicks although i bought mine directly from mcleod industries but came landed at my door in bc at over 500 bucks. year ones are 257 us. so with exchange and taxes probably around 4 bills.good luck pete.