I found out today that my booster is shot, but I pretty much knew that for some time. I have long wanted to switch my single reservoir master cylinder to a dual, but kept abandoning the project as I could not figure out which 1967 model year master cylinder would fit my 64 booster. Well now is the perfect oppritunity for me to get a 1967 master cylinder and booster. The only problem is I do not know if it will fit my car exactly, and I would rather not spend $150 at a clip for trial and error. As far as fitment, I refer specifically as to whether or not: 1) The four studs that hold the booster are in the exact same spot between model year 64-67 2) The four studs are of sufficient lenght to bolt up 3) The rod from the booster to the brake pedal will bolt up with no major modification. Could someone shed some light on this? Joe? I've tried to do a google search to see if any company had engineering drawings on the web, but could find none. Basic question is will a 67 booster fit exactly in a 64, and if so, the Delco or Bendix. Thanks. 1964 1967 Bendix>
