Ramsey Winch PTO for Dana 20

Discussion in 'Jeeps with the Buick Heartbeat' started by BBBB64lark, May 23, 2010.

  1. BBBB64lark

    BBBB64lark Rice eater

    Figured the Jeep Gladiator Gurus would be interested in this. E-bay item number 290438390959. You don't see many of these any more.
     
  2. Macjeeper

    Macjeeper MAC

    Thanks for the info!

    I have a complete PTO winch bumper and drive shafts and the Dana 20 PTO from a 1963 Jeep J-200 I had 15 years ago.

    Mac
     
  3. northcorner

    northcorner Guess what I'm thinking..

    While we're talking about Ramsey winches, does any one know where to get parts for worm gear winches? I have a (I think) M200 which is a 8000 lb winch. I really need the brass main gear, but I haven't been able to find one anywhere. Of course, Pierce sells every part to their winches, but so far Ramsey doesn't? Anyone??? Thanks?
     
  4. swampedge

    swampedge Well-Known Member

    I have a Ramsey PTO driven 8000# winch and every piece is still available except for the 60's 70's style u-joints for the drive shafts.
    Jim
     
  5. mpsvn1

    mpsvn1 New Member

    I will try again.
    I am interested in a pto and winch that fits a jeep dana20.

    I have a jeepster with a T18 and model 20 transfer case.

    1) will your unit fit the transfer case?
    2) what did you do about the rear cross member transmission mount--it is at the rear of the T18, therefore the lip of it extends about 2" under the Transfer case, thus it looks like it the pto will not bolt on.

    thanks
    Mike N
     
  6. mpsvn1

    mpsvn1 New Member

    If anyone does have pto (and winch) available for sale -- especially the pto that will fit a jeep dana 20 (mated to an T18 transmission), let me know


    thanks,
    Mike N
     
  7. Macjeeper

    Macjeeper MAC

    Have you inquired J&W Jeep Parts in Antelope, CA near Roseville?

    They have lots of J-trucks in their lot over 5 acres of Jeeps.

    http://www.jwjeep.com/

    BTW It didn't matter what transmission was included in vehicle for the Dana 20 PTO winch adapter.

    Mac
    Mine came off a 1963 J-200 I6 stepside........
     
  8. swampedge

    swampedge Well-Known Member

    The cross member has to be trimmed I believe when using the T-18. I'm running mine with a turbo 400 and a T-15 3 speed. No mods. The Ramsey PTO's are readily available if you look. The winch parts are out there but the PTO parts may not be available from Ramsey.
    Jim
     
  9. Macjeeper

    Macjeeper MAC

    You can check this site has a good description of the Dana 20 transfer case PTO Adapter that he is looking for:

    http://www.jeeptech.com/winch/d20pto.html

    With thumbnail pictures and all.

    Mac
    1970 J-3000 Gladaitor
    Suisun City/ Fairfield, CA
     

Share This Page