Quartz conversion for my dash clocks!

Discussion in 'Interior City' started by gssizzler, Dec 22, 2022.

  1. gssizzler

    gssizzler Well-Known Member

    So an early Christmas present, two clocks for myself and one for a present to a buddy! For the 65’ Skylark GS’s! Instrument Services did a great job and I should be on time now! Lol
     

    Attached Files:

  2. bostoncat68

    bostoncat68 Platinum Level Contributor

  3. chiefsb30

    chiefsb30 Gold Level Contributor

    Yeah, I had Instrument Services do a rally clock, and I really liked the end product.
     
  4. flh73

    flh73 Gold Level Contributor

    looks great, I just got my original 67 clock working just cuz, nothing wrong with quartz. Maybe a little highjack but what knob does the 67 take, mines missing. thanks
     
  5. Briz

    Briz Founders Club Member

    They did the clock for my Riv. Probably 10 years ago. hasnt missed a second in that time
     
  6. rkammer

    rkammer Gold Level Contributor

    Just curious if the second hand on the quartz conversions have a smooth or notched (one click per second) movement?
     
  7. 12lives

    12lives Control the controllable, let the rest go

    I bought their kit and did my own. It wasn't hard, just followed directions. flh73 - You can sometimes find the knob on ebay.
    or put a "wanted" post on this board!
     
  8. elagache

    elagache Platinum Level Contributor

    Dear gssizzler, Ray and V-8 Buick time keepers,

    I'll definitely chime in to agree with you! The clock that I added to my trusty 1965 Buick Special wagon back in 2013 was also upgraded to a quartz movement by Instrument Services. It still is working great almost a decade later.

    https://www.clocksandgauges.com/

    No clock in the house keeps as perfect time as the clock in Biquette! Only the radio-controlled "atomic" clocks do better and only if they can retrieve the radio signal to keep from going off.

    The second hand moves continuously and smoothly. It looks like the clock would have looked from the factory in 1965. It just keeps much more accurate time!

    Cheers, Edouard
     
    rkammer, chiefsb30 and FLGS400 like this.
  9. FLGS400

    FLGS400 Gold Level Contributor

    Same here, works great and smooth too!
     
  10. 6455spd

    6455spd Silver Level contributor

    I bought a bunch of clocks at the second hand stores usually for a buck. It took awhile till I was able to find one that was the same size shafts as the original 64 buick clock hands.
    It uses a single AA battery that keeps working even when I unhook the car battery. Fun project and still ticking.
     
    rkammer likes this.
  11. rkammer

    rkammer Gold Level Contributor

    That sounds like a good idea. But, are you able to replace the AA battery without having to remove or partially remove the dash?
     
  12. 6455spd

    6455spd Silver Level contributor

    I soldered a battery tray with long enough wires to velcro it in a convenient spot under the dash. Adjusting the time is a little more difficult to reach, but it isn't too bad and being in the fringed north, I don't bother adjusting it for daylights savings. The easiest way for me to set the time is to set an alarm on my phone and plug in the battery at the matching time on the clock. Second hand ticks like the original, but without the sound of the points popping.
     
    mrbuick65 likes this.
  13. 87GN_70GS

    87GN_70GS Well-Known Member

    Smooth. They are not hard to do. The kits are about $100. I charge $40 to do the conversion
     
  14. mrbuick65

    mrbuick65 Well-Known Member

    Beleive I have a knob and barrel nut for the 67 clock. Will look tonight.
    John
     
  15. rkammer

    rkammer Gold Level Contributor

    PM sent.
     

Share This Page