Misc engine and '67 body parts getting recycled soon

Discussion in '"Pay It Forward"' started by tjcole, Mar 9, 2009.

  1. tjcole

    tjcole 60's Buick nut

    I really need to make room in my workshop and have been selling a lot of stuff recently to clear it out. Some stuff I have is not selling and in a few weeks I'm taking a load of Buick hardware to get recycle for a few bucks.
    So far I have the following in the back of my truck destined for the recycle center: (all of which have nothing wrong with them and are in good condition)

    -'68 430 bare block in good condition.
    -'66 2bbl intake manifold
    -'67 4bbl intake manifold
    -'67 2bbl intake manifold
    -'67 340 heads
    -'66 300 heads
    -Two '67 passenger side front wheel wells
    -'70 455 block (cylinder #6 should be sleeved, otherwise a good block)
    -'68 430 valve covers, (they are all bulged out and to me not any good to sell, but if you want you can have for free, just pay for shippping)
    -'68 430 center sump oil pan (it has a pin hole in the bottom) free to a good home.


    There is much much more misc stuff but haven't decided yet whether to keep or not.

    If anyone wants any of this stuff, just pay for shipping and a small donation for the packaging and gas I'll use (your discretion) and it's yours.

    Thank you,
     
    Last edited: Apr 8, 2009
  2. Gulfgears

    Gulfgears Gulfgears

    Looking for a control cable for defroster on 66 skylark.

    It's approximately 20" long with blue tabs.

    Any possibilities?? Car is A/C model don't kknow if that makes any difference on defroster cable.

    Thanks
     
  3. Flint 67 GS

    Flint 67 GS Well-Known Member

    Still looking for left and right fenders and trunk lid if comming up Thanks Mike
     
  4. tjcole

    tjcole 60's Buick nut

    I have one '67 passenger fender left.
    you can have it for $15 plus shipping.
    It is not pretty and has mild to moderate surface rust but I believe it can be resurrected by a good body man.
    The person I got it from had poured paint remover on it and never finished the task.
     

    Attached Files:

    Last edited: Apr 7, 2009
  5. tjcole

    tjcole 60's Buick nut

    Gulfgears,

    I'll look for those cables. If '67 uses the same ones I may have one... maybe.

    I'll look tonight.

    Thank you,
     
  6. dntack

    dntack 67 Skylark

    looking for a drivers side door handle, any chance you have one around in fair condition?
     
  7. twolfinger

    twolfinger Fly Eagles Fly

    If he doesn't have the door handle, I am sure i do. i have a 66 parts car that I still have to pick up. keeps getting delayed due to the snow we keep getting. Tentatively grabbing it this weekend. Let me know if Todd doesn't have it.

    Ditto the defroster cable.

    Tom
     
  8. jasonweissinger

    jasonweissinger Well-Known Member

    If not you then can someone help with a battery tray for a 67 Lark?:pray:
     
  9. tjcole

    tjcole 60's Buick nut

    Hello,

    After looking I found one good drivers side door handle. I don't really have any cables so far that are what I would call "good enough" to sell to anyone. But I'll keep looking for that.
    The fender is my last one.
    I do have one last battery tray for a '67 but it is rusty. I don't know if anyone can work any magic with it, like for example fiberglass and POR15 might work?

    I'll send pics of both the door handle and the battery tray today when I get home.

    Thank you,
     
  10. dntack

    dntack 67 Skylark

    I would love to see that handle, thanks for looking!
     
  11. tjcole

    tjcole 60's Buick nut

    Here is the handle and the battery tray pictures.

    I know the battery tray is rusty but if you can still use it. I'll give it to you for the cost of shipping

    How about $5 +shipping for the door handle?
     

    Attached Files:

  12. tjcole

    tjcole 60's Buick nut

    I have a drivers side door handle with minor pitting on top for $5 plus shipping.
    Also my last '67 fender is still available, the one I posted pics of earlier in this thread
     
  13. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    how is the trunk pan
     
  14. tjcole

    tjcole 60's Buick nut

    Don't have the car body anymore.
    the only body parts I have left now is the one passenger fender, some front stainless wheel well trim, one drivers door and one passenger door (was a two door hardtop car) about four rear quarter glass (non tinted) and one passenger side front inner fender well.

    That's it for body parts.

    Thank you,
     
  15. 68riviera430

    68riviera430 BRRRRAAAAP!

    Is the 68 center sump oil pan the same as a stock one? If not (it has some sort of benefit over stock) ill take it.
    Also...that 455 would still be perfect for me if only someone could please bring it to me:Do No:
    Thanks
    Adrian
     
  16. tjcole

    tjcole 60's Buick nut

    I do have the center sump oil pan. But it has a pin hole in the bottom so I never bothered to post it.
    I might be coming into a good center sump oil pan this weekend... maybe.

    Have you checked craigslist in your area?
    check these out for engines:
    http://sfbay.craigslist.org/eby/pts/1103229535.html

    This engine sounds like something you may want to check out.
    This person says he has most of what you need except rods and I have those if you need them.

    Let me know how it works out for you.

    Thank you,
     
  17. brandotheamazin

    brandotheamazin Well-Known Member

    Do you have a hood for a 67? PM me if you do. if not no worries! :)
     
  18. tjcole

    tjcole 60's Buick nut

    I had a '67 Skylark hood, but a friend of mine has it now. I'm not sure if he evens wants it. I'll contact him and see if he still has it. However the tip was dented in a little and there was one other small dent in it. Other then that it was solid, no rust.

    Thank you,
     
  19. gs4u2c

    gs4u2c Is that a 442?

    Hey Todd,

    I'm interested in the fender if it's still available? You don't happen to be going to the Mt Vernon swap tomorrow by chance?

    Thanks,

    Tim
     
  20. tjcole

    tjcole 60's Buick nut

    Hello Tim,

    No, I will be working to late and too much to do.
    I will be going to the Greyhound depot either tomorrow (Friday) evening or Saturday before 5:00pm to ship a couple packages.

    I can meet you there if you like and you can inspect the fender there or you can come up to my house and see if there are any other '67 stuff you need. I'm home all day on Sunday.

    Let me know what you want to do.

    Thank you,

    Todd Cole
    360.895.4227
     

Share This Page