Looking for a locksmith

Discussion in 'The Bench' started by Redmanf1, May 24, 2022.

  1. Redmanf1

    Redmanf1 Gold Level Contributor

    I am looking for a locksmith to make me some 67 keys.
    Thanks for any help
    Nelson
     
  2. David Hemker

    David Hemker Well-Known Member

    I use Stan's Locksmith in Saginaw, MI.
     
  3. Fat Rusty

    Fat Rusty Well-Known Member

    You want the keys cut to the factory cuts on the Key? I was a locksmith for 15 years. Any decent locksmith will be able to generate a "New" key. That is one with the factory cuts on a key. Otherwise the key will be a duplicate copy of a worn out key. If you have lost all the keys, you should be able to obtain a code from the glovebox key and go from there.
     
  4. CJay

    CJay Supercar owner Staff Member

    I use Walt at Wolf Secutity in Georgia. He's great. I send him a pic of my keys and he cuts them. Has GM key blanks too
     
  5. Redmanf1

    Redmanf1 Gold Level Contributor

    I have tried many times to email and call him with no response. Might be out of business???


     
  6. Redmanf1

    Redmanf1 Gold Level Contributor

    I have the keys and would like to use GM style blanks. As far as factory cuts?? as long as they work..
    Thanks



    .
    akey1.jpg
     
    Last edited: May 24, 2022
  7. Redmanf1

    Redmanf1 Gold Level Contributor

    Any others?
     
  8. Max Damage

    Max Damage I'm working on it!

    Any competent locksmith can make a copy of a working key? Nothing special. I like Bulger Lock and Safe here on Lake City Way in Seattle. Just a locksmith though.
     
  9. 95CCRMW

    95CCRMW Well-Known Member

    Hello, just thought I’d throw in my story. I also needed keys for one of our 67s. I ended up seeing an ad through google for a guy on Etsy selling cut to order keys. So we pulled the lock out of the passenger side got the code and sent to him. Got the key in about 2 days I think. Initially the key didn’t work and I was dumbfounded. After trying a different code and the key not working again, I found that generic gm blanks have different slot lengths. After cutting my original keys slot longer the key now works and I can go out and have my gm replicas cut to the new key. Not the greatest route but I have lived and learned.
     

    Attached Files:

Share This Page