Just wanted to confirm: this is center headliner bow?

Discussion in 'Interior City' started by NZ GS 400, Nov 8, 2020.

  1. NZ GS 400

    NZ GS 400 Gold Level Contributor

  2. NZ GS 400

    NZ GS 400 Gold Level Contributor

    20201109_103905.jpg Hard to see, but the wire held in with prongs? It's a 67 GS

    Here's a shot of the end of it and of it removed. 20201109_105442.jpg There was no headliner in the car, so I can't use that as a guide.
     
    Last edited: Nov 8, 2020
  3. steve covington

    steve covington Well-Known Member

    UH-OH!!! You didn't match /mark your bows with the original location holes? Experimentation time!
    Also, does your car have the roof lamp, or are yours on the sail panels? If on the roof, it requires at least one clip that is different to hold the wiring.
    Based on your roof shot, I see the screw holes for the lamp...
    https://www.npdlink.com/product/cli...iner%2Bclips&top_parent=8&year=1967&year=1967
    I know, I know, It's a Chevelle catalog, but certain items cross over.
    https://www.npdlink.com/product/cli...Bbow%2Bclips&top_parent=8&year=1968&year=1968
    Again, I know it's a Chevelle catalog, AND I know thyat THIS item says for 1968 -1972, and yours is a 1967...
    Just TRYING to help...
     
  4. NZ GS 400

    NZ GS 400 Gold Level Contributor

    Thanks Steve, I don't even know if the bows were in the right holes when I bought the car. The headliner was long gone. Anyway, I am feeling good about my progress on the new headliner installation. Definitely some trial and error. Pictures coming up when I am finished.
     

Share This Page