GS67 fuel sending unit

Discussion in 'The Mixing shop.' started by DonGS67, Jan 18, 2022.

  1. DonGS67

    DonGS67 Member

    I'm new to the V8 Buick site and would appreciate any help.
    My fuel gauge was reading incorrectly so I went in search of one to replace it. OPG lists two units for my 67. I ordered the one with the 3/8 line. The shop doing my repairs said it was the wrong one so I ordered the 5/16 unit but it to was wrong. The shop says I need a ending unit with two lines. Any suggestions?
     
    Last edited: Jan 18, 2022
  2. GS44667

    GS44667 Worlds First Stage1 Conv

    Got mine out of a 67 cutlass, it may have had calif emissions. 1967 sportwagon 400 also.
     
  3. flh73

    flh73 Gold Level Contributor

    67 GS 400 used 3/8 feed and 1/4 return lines. I can't remember if non-A/C cars had a return line. Anyhow if you have two that would be what is needed. Check www.oldbuickparts.com or www.thepartsplace.com.

    Gary
     
  4. GS Spoken Here

    GS Spoken Here Well-Known Member

    My 67 GS convert, is non-AC and has the 3/8 and 1/4 unit, check Rock Auto but not 67 GS just 67 Skylark they list 2 with 3/8 1/4 .
     
  5. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

  6. DonGS67

    DonGS67 Member

    Thanks for your help, I'm still looking for any more suggestions where I may find a fuel sending unit for my 1967 GS. I need a unit with dual lines a 3/8 and a 1/4. Any ideas would be appreciated.
    Thanks,
    DonGS67
     
  7. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

  8. 12lives

    12lives Control the controllable, let the rest go

  9. Chi-Town67

    Chi-Town67 Gold Level Contributor

Share This Page