Anyone have a lower control arm boxing kit?

I media blasted my non boxed lower control arms and would like to box them. Anyone have the "boxing kit" that they are not using?
Thanks

 

https://www.summitracing.com/parts/..._cJFC6zxDCYRDsAmxhRS830Q0yWVYTfBoCCjMQAvD_BwE

 

you can buy the ebay tubular ones for not alot more though.

 

Will the sway bar bolt up to tubulars?

 

yes they are drilled for them

 

around a 120 bucks but by the time you paint weld and buy bushings you are about the same.

 

Get a 2" x 36" steel plate from Depot & 10" length of pipe and weld 'em up. Costs less than $20 and done.

 

yeah but the bushings for cheap ones are about 40-50 bucks and those brackets i posted you can find for 20ish then paint. so hed be in close to a hundred in the stockers after it was done. 120 you can get better stronger ones that are bolt in and have high performance bushings as well.