Any idea?

Discussion in 'Got gears?' started by NoVA_69_GS350, Aug 8, 2021.

  1. NoVA_69_GS350

    NoVA_69_GS350 Well-Known Member

    Pulled my rear axle and i was curious if anyone could tell what it was my looking at it? Its got 10 bolts, no markings other than at tag saying to use limited slip diff lube oil. I haven't opened it up yet so I'm not sure what gears are in there. Thanks for your help.

    20210808_185724.jpg 20210808_185720.jpg 20210808_141139.jpg 20210808_141137.jpg
     
  2. gsfred

    gsfred Founders Club Member

    If you clean the LH axel tube you should find the codes. They are on the bottom side as the rear sat in the car. That can be looked up and you'll know what you have without opening it.
     
  3. BrianTrick

    BrianTrick Brian Trick

    Buick 8.2” 10-bolt.
     
  4. monzaz

    monzaz Jim

    1968 - 1970 8.25 BUICK rear....THE odd ball one
    LArge carrier bearing on driver side and larger 1.875 pinion inner bearing.

    Jim
    JD
     
  5. 12lives

    12lives Control the controllable, let the rest go

    Look here:
    IMG_1076.JPG
     
  6. monzaz

    monzaz Jim

    CODE will be on the bottom of the drive side tub facing the ground.
     
  7. BrianTrick

    BrianTrick Brian Trick

    I can see part of the code in picture #2,but I can’t make it out from here.
     
  8. monzaz

    monzaz Jim

    I thought I did too. BUT like you said the picture is a bit not res enough.
     
  9. monzaz

    monzaz Jim

    Housing should be clean enough to get it.
     

Share This Page