Aftermarket Th350 pan recommendations?

Discussion in 'The "Juice Box"' started by Bogus919, Sep 12, 2020.

  1. Bogus919

    Bogus919 Silver Level contributor

    Hello, looking for a good pan with a plug in it. Something you have bought recently that fit well and you haven’t had issues with. I want something American made if possible but if it’s quality then I guess it doesn’t have to be.

    If you can post a link or point me in a general direction, it would be appreciated.

    Thanks for the help.
     
  2. Matt69olds

    Matt69olds Well-Known Member

    I have used TCI pans, and a few B&M. They fit well and seem to be nicely machined. I have no clue where they are cast, or machined.
     
  3. DEADMANSCURVE

    DEADMANSCURVE my first word : truck

    Check the Derale pans with cooling tubes . Never used one (Muncie in car now) but makes sense . Have bought and sold a couple . Seems like that and a basic inline cooler would keep temps down nicely .
     
  4. 1973gs

    1973gs Well-Known Member

    I have them on two of my cars. They are the best pans that I have seen. They have a very thick flange so the gasket seal well.
     

Share This Page