73' 455 intake choke

Discussion in 'Parts wanted' started by bobs67sky, Feb 25, 2021.

  1. bobs67sky

    bobs67sky Well-Known Member

    Looking for the choke unit that bolts to the stock intake and connects to the Quadrajet
     
  2. hwprouty

    hwprouty Platinum Level Contributor

    I have a few, do you know the # you need and I'll check!
     
  3. 1969RIVI

    1969RIVI Well-Known Member

    Bob if you're interested I have a setup from a 74. I'm in Onario so shipping should be easy.
     
  4. bobs67sky

    bobs67sky Well-Known Member

    I do not have a part No. Harold, the one i have is the wrong bolt pattern for the 455 / 73 intake.

    Thanks Bob i will go over to where the car is and investigate further / get back to you
     
  5. hwprouty

    hwprouty Platinum Level Contributor

    If Rivi doesn't get you fixed, let me know and i'll dig them out...
     
  6. rp455

    rp455 Well-Known Member

    i did not know that a 73-76 4-455 used a divorced choke
     
  7. 1969RIVI

    1969RIVI Well-Known Member

    I think what Bob is referring to is the CHOKE THERMOSTAT. Or atleast that's what I thought he was looking for?

    EDIT: I was corrected on the terminology of what the part was actually called as my description was apparently not good enough so I edited my post to reflect that. Bob if that's what you need I can help.
     
    Last edited: Feb 27, 2021
  8. techg8

    techg8 The BS GS

    It was 73-74 that still had divorced choke, with the thermostatic coil in the intake.

    75-76 had hot air choke I believe, with the coil on the carburetor
     

Share This Page