71 or 72 quarter panel extension trim

Discussion in 'Parts wanted' started by mbryson, Aug 4, 2022.

  1. mbryson

    mbryson Owner of Ornery grandma Buick

    I think that's what the trim piece is called. The piece that goes behind the rear tire. 16596638891597703759823503426501.jpg

    Bonus points for fasteners
     
  2. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    This is a 1/4 panel extension BED4F057-E608-49E6-B15A-651FF7EDF0FB.jpeg DDF50BD2-AA87-43E4-9BD5-4C910A314002.jpeg I think you might be looking for the ribbed rocker panel trim used on the Skylark Custom models?
     
    mbryson likes this.
  3. mbryson

    mbryson Owner of Ornery grandma Buick

    The rocker trim is what I'm looking for, correct.
     
  4. Dano

    Dano Platinum Level Contributor

    I have one side. Will have to check cond. Definitely don't have the hardware.
     
    mbryson likes this.
  5. mrskylark71

    mrskylark71 Well-Known Member

    Sent PM
     
    mbryson likes this.
  6. mrskylark71

    mrskylark71 Well-Known Member

    I have the mounting discs also--
     
  7. Dano

    Dano Platinum Level Contributor

    If Paul can hook you up w/everything, go for it!
     
  8. BrunoD

    BrunoD Looking for Fast Eddie

    I have many of those,with and without the chrome piece,in some different colors.Bruno.
     
  9. Dano

    Dano Platinum Level Contributor

    Here's the one I have. There's a dent in it that could be fixed. $20 shipped (basically free - just covering shipping) if anyone needs it.
     

    Attached Files:

  10. 70455ht

    70455ht Well-Known Member

    I have a pair
     
  11. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    I've seen the long rocker trim BETWEEN the front and rear tires, NOT behind the rear tire. If there is such a thing, it has to be pretty rare. Not sure if I have ever seen such a thing.
     
  12. Dano

    Dano Platinum Level Contributor

    One particular Skylark model/series (Custom IIRC) that came with them.
     
  13. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Yeah, I think I have seen them, but like I said, I'm pretty sure that they are rare. I know earlier Buicks had them,

    CC-108-019-925.jpg
     
  14. BrianTrick

    BrianTrick Brian Trick

    The 71 Skylark that I parted last year had that rear lower trim. Too fancy for me.
     
  15. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    I knew I had seen it recently, but could not remember where. Then I thought about Beaver Springs. It was Jenna Nieves' car. A 1971 post car.

    IMG_2545.jpg

    Jennas71.JPG
     
    Last edited: Aug 23, 2022
  16. mrskylark71

    mrskylark71 Well-Known Member

    Rare --and very useful for covering the lower rust area in the lower rear 1/4!
     
  17. BrianTrick

    BrianTrick Brian Trick

    Also very unuseful in trapping debris and moisture that eventually leads to rust.
     
    mbryson likes this.
  18. mbryson

    mbryson Owner of Ornery grandma Buick


    That piece below the rear marker.light is exactly what I was looking for. I need a driver's side now
     
  19. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Like I said, that is rare. It will be hard to find.
     
  20. Matt Knutson

    Matt Knutson Well-Known Member

    My '70 Skylark Custom convertible came with those trim parts and were the first parts removed and gotten rid of. IMO they do not look so good on these cars and as mentioned before - trap dirt and moisture. I think the attaching hardware/ plastic keepers that clip to the weld studs will be the more difficult parts to locate.
     
    Dano likes this.

Share This Page