Car was originally a GS 350,.has a TR code 71 455 swap Th350 Rally wheel Bench seat 14in rally wheels Disc brakes 2.5in flowmaster exhaust Roof skin has been replaced Most body work has been done WILL BOLT BACK TOGETHER WHEN A SALE IS FINAL Needs interior, paint, vinyl top and re-assembly Engine runs great as is but has an exhaust leak at the manifold on the driver side Trans shifts fine neither leak,..it sits on concrete with no evidence of it doing so Has a temporary electric fuel pump plumbed in under the driver floorplan Needs a water pump to be driven any real distance but yard drives fine Listing for a friend but I know the car well Located in 29376 SC $4800 firm no dicker,.dont like the price? He nor me cares, will meet up to 200miles out for delivery
Car will include a complete GS breather assembly and GS hood with scoops. It looks like a mess I know but really isn't bad,..its just apart if that scares you,..then obviously this isn't for you. If you can operate some hand tools and perform some simple task you can have a running driving legit GS with 455 power for less than 10k. I drove it when it was together it ran strong with no smoke or noise other than the exhaust leak. It can set for weeks on end and with one push of the pedal to set the choke it fires rite up every time. Whatever you see missing will be provided in some capacity
Looks like a pretty nice solid project. Just so I know, body parts would be bolted back on for transport. Glass or no? Asking for a customer. Thanks a lot
Yes it would all be bolted back together,.I've got a good windshield I think,..not positive but otherwise yes the glass, bumper, hardware etc all are present
One of them fuzzy vinyl tops took its toll,.Few small holes in trunk pan there was a couple of small areas behind the tires, Idk if he welded those and or duraglass them ,.iirc there was a small spot in the pass door, body is pretty dang straight
When you say "needs interior" what do you mean? Nothing there? Everything shot? Seat frames? Thanks for clarification. Looking for a project. Not in line yet.
Everything is present just needs replacement,..headliner, door panels, rear seat covers, I have a better front seat out of a 4door. Dash pad is cracked but I have a better one I'll throw in. But everything is there,..I have a set parchment standard door panels put up I believe that were pretty decent I would throw them in if a man wanted as well
Ethan, How much would you charge for paint/bodywork as a white X clone? No hurry. In other words, all in as is with a nice paint job and stripes? I don’t care about interior or drivetrain.
Grill is actually pretty nice,.but needs to be lightly glass beaded and refinished,..rear is just an open probably a 3.08,...$4800
Checking to see if it is still available? I would be very interested if it is. I'm in Northern Virginia, right outside of Washington, DC. Thanks, Chris
