70 Stage1 w/AC pulleys needed, several other bits, too...

Discussion in 'Parts wanted' started by Smartin, Dec 5, 2022.

  1. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Looking for water pump pulley and crank pulley for 70 GS Stage1 with AC. I have the oversized compressor pulley already.

    Also looking for the trunk stainless trim in decent shape. I have the quarter extension moldings but need rechromed.

    TH400 dipstick and tube
     
  2. PackerBacker

    PackerBacker Blake's Dad

    Adam -
    Do these have part numbers stamped on them and if so do you know what they are? I've got a lot of pulley's as I'm sure many do.
    Steve
     
    STAGE III likes this.
  3. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Not a clue LOL. I’ll have to look in the assembly manual to confirm numbers. A buddy already texted me that he has the parts. Just waiting on confirmation
     
  4. George D.

    George D. Platinum Level Contributor

    Adam..... Just so happens I THINK some of those parts the owner has sitting in my garage.... I have Wednesday off. Should we facetime and discuss what he has here that you may be able to use????

    Hell, I think at this point it may be easier for you to come here, pick up the white car and take ALL of the parts!!! I have the correct trunk trim (nice), with correct screws, I think a Th400 stick and tube, replated hood latches, cross bars, more trim, and a bunch of other crap for him....
     
  5. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Sigh…
     
  6. George D.

    George D. Platinum Level Contributor

    Off the top of my head..
    Perfect trunklid
    stainless
    NOS 70 tail light lenses
    3 or 4 restored hood latches (DL ones)
    Original PF24 oil filters
    Complete front suspension- USA made ball joints, tie rods, etc
    Front and rear springs- the good ones
    Original rechromed center caps
    misc weatherstripping
    complete set of 1970 window felts- 2 sets
    complete set of 1969 window felts
    misc small brackets
    Bunch of gaskets
    1970 hood scoops, fiberglass, seals
    1969 GS aircleaner- body powdercoated, decent fiberglass
    few 1970 air cleaner elbows
    cross bars
    some brake lines
    disc brake spindles, calipers, new backing plates, new brackets
    air cleaner foam
    Oh, the floor sound deadner- complete kit

    Oh, NEW parts place dash surround
    NEW Parts place radio bezel
    Restored 1970 floor shifter

    10-12 full boxes of crap buddy!!!
     
  7. PackerBacker

    PackerBacker Blake's Dad

    Looks like you hit the "jackpot" LOL
     
    Smartin likes this.
  8. George D.

    George D. Platinum Level Contributor

    packer- you have no idea.. LOL. Hell, the pulley's he's looking for I sent to recycling ~ 6 months ago!!!
     
  9. PackerBacker

    PackerBacker Blake's Dad

    LOL I've been on both ends of that scene. I can search through my vast pulley collection on Thursday evening.
     
  10. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Pulleys located and shipped...thanks!
     
  11. Dano

    Dano Platinum Level Contributor

    I should have a perfect & a near perfect trunk stainless if all else fails.
     
  12. Smartin

    Smartin antiqueautomotiveservice.com Staff Member

    Ok. I’ll keep that in my back pocket.

    Trans dipstick and tube are found as well.
     
    Dano likes this.
  13. George D.

    George D. Platinum Level Contributor

    Adam- PM sent...
     
  14. ToddsGS

    ToddsGS Founders Club Member

    I have pulleys on my websites OEM Parts section if you need more ( some nice ones)

    I also have 2 sets of OEM trunk trim.
     
    Smartin likes this.
  15. Mike Sobotka

    Mike Sobotka Founders Club Member

    DUDE.
     
  16. George D.

    George D. Platinum Level Contributor

    Trying to get Adam parts he needs for your car sir.... ;)
     
    Brett Slater likes this.

Share This Page