70-72 Skylark 350 front replacement coil-springs

Discussion in 'Small Block Tech' started by Sebambam, Nov 21, 2020.

  1. Sebambam

    Sebambam Well-Known Member

    Hi guys
    does anybody have a part # for the stock replacement front springs for a 350?

    i saw Moog 5536 but they are listed as 455 coils?
     
    Sebambam, Nov 21, 2020
    #1
    72gs4spd likes this.
  2. Matt Knutson

    Matt Knutson Well-Known Member

    Rockauto used to have a nice selection. Have you checked there?
     
    Matt Knutson, Nov 21, 2020
    #2
    Sebambam likes this.
  3. 72gs4spd

    72gs4spd Well-Known Member

    I put these in my 72 Gs 350. Have UMI control arms with longer ball joints car sits nice with a slight rake downward to the front. Before the control arm swap car sat level.
     
    72gs4spd, Nov 21, 2020
    #3
  4. alec296

    alec296 i need another buick

    5536 are tall coils for a 350. You can cut a ring off them . They have the heaviest wire diameter so they are firm.
     
    alec296, Nov 21, 2020
    #4
  5. Sebambam

    Sebambam Well-Known Member

    So I have 2" drop spindles and tubular control arms with stock springs 1/2coil cut... it's way to low.. so I try to fix it with new stock height springs if 5536 is stiff I do not want that. I want a factory replacement spring for a 350 car
     
    Sebambam, Nov 21, 2020
    #5
  6. Sebambam

    Sebambam Well-Known Member

    Lol i didnt check the most obvious source yet..
    i wanted to see if there is a specific part # that is absolute accurate.
    But i am checking RA now
     
    Sebambam, Nov 21, 2020
    #6

Share This Page