69 Skylark parts, parting out another car

Discussion in 'Parts for sale' started by carmantx, Mar 2, 2010.

  1. carmantx

    carmantx Never Surrender

    Looks like we are bringing home another Skylark that has faded from it's former glory. I should have it in a week, but wanted to get some interest on items so we can be ready.
    Car is a 69 Skylark 2 door. It is almost complete and appears to not have any rust problems. It DOES NOT have grill or front bumper. It does have interior, in worn condition, but many items available. It was a column shift automatic.

    Items that appear in good condition, but will confirm:
    Front fenders $250 each
    Doors, non post $125 each
    Quarter panels, with inners $350 each
    Trunk lid $100
    Steering Column $50
    hood latch support $30
    Dash gauge panel $50
    remote driver side mirror $25

    Tons more stuff, plus the 72's we are pulling apart.
    Per board rules, please post here for any interest on any item from this car.

    Thanks for looking. This car has some nice parts left. Hope they can help someone out.
     
  2. James McD

    James McD Well-Known Member

    Front fenders, and lwr quarters as well.

    Depends on the condition and shipping..

    Thanks,

    James McDaniel
     
  3. hemikillerstg1

    hemikillerstg1 Living the dream ✨️

    I need a passenger side fender eyebrow stainless trim.
    if it's dented I would need to see how bad it is.

    Thanks
     
  4. onemansgarbage

    onemansgarbage I'll take it!

    Hi Mark. I would be interested in the core support if it's good.
     
  5. ajesh35

    ajesh35 Well-Known Member

    pm sent
     
  6. Maintool-GS

    Maintool-GS Well-Known Member

    Dashpad ?
     
  7. 1969buickmatt

    1969buickmatt Well-Known Member

    Is the pass front inner fender any good.
    if so what's shipping to 48362
    thank you
     
  8. carmantx

    carmantx Never Surrender

    Thanks everybody, I'll probably pick this car up this weekend and update everybody and get it ready to go. So, all of you are in line for what you have expressed interest in.

    James, where are you located? Greyhound is usually the most cost effective for shipping fenders.
     
  9. 455nglide

    455nglide Working On A Dream

    intake

    If the car has a four barrel carb and intake I would be interested in the intake and another board member is intrested in the carb if it is for 350.
    Regards,

    455nGLIDE
     
  10. James McD

    James McD Well-Known Member

    I am in Poulsbo WA, 98370.

    James McDaniel
     
  11. RoadDawg

    RoadDawg Well-Known Member

    If you'd be willing to separate the quarter from the outer wheel well on the passenger side, I'm still looking for the outer wheel well.
     
  12. LOLO

    LOLO Well-Known Member

    A/C center vent?
     
  13. 1100kaw

    1100kaw Well-Known Member

    Rear Bumper, if its strait/driver condition. Strait is most important. I am thinking a bout painting if chrome bad.
    Thanks Darrell
     
  14. gtjr

    gtjr Well-Known Member

    If this is a no air car I would be interested in the duct work that attaches to the defroster ducts. Also the heater control panel, and I might take the heater box that directs the air on the floor. Let me know if you have any of these things.
     
  15. Ken Mild

    Ken Mild King of 18 Year Resto's

    Mark, what color is the interior? Are the sail panel boards in good shape? If so I need them.
     
  16. carmantx

    carmantx Never Surrender

    Update, should pick up car tomorrow or Monday.
     
  17. carmantx

    carmantx Never Surrender

    Ok, car is here, we can get pictures and more info. PM me or email to mark@texasextremeracing.com with you email address for pictures.

    Rob, driver side quarter looks nice and under lip of wheelwell has no rust holes.

    James, driver side fender is very nice, passenger side has small rust area on bottom, and small dent area. Inner support is solid. I can ship them by bus to your nearest terminal.

    Chris, I'll check the passenger eyebrow for you.

    Dave, core support is rusted under battery. Good everywhere else.

    Maintool - GS, the dash pad is cracked

    69buickmatt, Passenger inner fender is rusted and cut for access to the blower.

    455nGlide, this one has a 2bbl

    roaddawg, the passenger quarter has some light damage and repair. The outer wheelwell seems to be nice and not rusted. We may be able to seperate them for you.

    Ricardo, center vent is there, can send you picture to see if it will work for you.

    Darrell, the rear bumper is straight and very nice.

    Gtjr, this is an A/C car

    Ken, the interior is light color, seats are white, and trim seems to be a little off white. Sail panels appear to be good.


    Thanks for being patient while we got this one home. For shipping cost and totals, let me know where you need them shipped and Tyler will start pulling it apart. He needs money for the rear drag bar.
     
  18. onemansgarbage

    onemansgarbage I'll take it!

    Mark
    I will pass on the core support. I have one just like it. Thanks anyway.
     
  19. carmantx

    carmantx Never Surrender

    No problem Dave. Every once in a while we run across one that is very nice.
     
  20. onemansgarbage

    onemansgarbage I'll take it!

    If you happen to come across one let me know. Thanks
     

Share This Page