I got a new repop FL for a 67-68 GS-400 fits the GS fuel pump. Not the small one but the bigger pump...... Its SS made by a outfit in the Cleveland area IIRC. Forget the name of the company... Part # APC6701S.
If I remember correctly original 67 was a one year pump to carb line, carb fitting was on the pass side, not in front.
It is the metal line, and 67 is by itself as the inlet is on the side. I'll check the getdiscbrakes place.
I got 1each. 1 for the 67-8. and one for the 70+ GS. Im using the 800cfm carbs at this time. It fit greats it did need a little bit of massaging to get it to lay right... Im very sure the 67 will fit just as great with massaging... I would give GDB a call There web site is showing NA when you do a search on there site... I believe the S in the part # designates Stainless.
Get your car fixed Fred. You have 2 weeks before the "Get Together." Don't make me call AAA to get your car here. It's only 10 miles. Love you buddy!!!
Pictures of line. I set it up on a 455 with a standard fuel pump and a 66/7 carb. The intake on this engine is a performer close to stock, at least the carb is in the stock place. I am not good at remembering if a steel line was used on 66 Riv with a Q jet. So I am not sure if it is 6 or 7 but fists OK, Line has a few nicks, need cleaned and one ear on the carb end is slightly rounded. Here are the pictures getting old and forgetful.
