4 Speed Neutral Safety Switch Part - Part Located - Reproduction coming!

Discussion in 'Parts wanted' started by ToddsGS, Aug 6, 2021.

  1. ToddsGS

    ToddsGS Founders Club Member

    Looking to Purchase or Borrow one of these to Reproduce . . . . . .
    Update . . . We have located this part and will be reproducing it.

    If you have one and would be willing to loan it I would get it back in the mail to you within a day or two of me receiving it!

    Or as mentioned we'll purchase one!


    Thank You


    We need the part circled and held on by the 1 bolt . . . . . (It activates the Neutral Safety Switch)
    ShifterLoop.jpg


    Update 10-14-2021
    Our Reproduction Part is just about ready for market. I'll have 20 of them hopefully be the weekend. Thanks again to George for loaning me an original piece!

    These will be on the website soon. Not sure on cost yet, waiting on the bill from the Machine Shop that cut them out . . . .

    Here's a photo showing the reproduction on the Right Side of the picture . . . (and Yes, it's offset as was the original)
    BuickNeutralSafetySwitchLoop.jpg
     
    Last edited: Oct 14, 2021
    Brett Slater and Dano like this.
  2. George D.

    George D. Platinum Level Contributor

    Todd- I can hook you up
     
    Dano and Brett Slater like this.
  3. Brett Slater

    Brett Slater Super Moderator Staff Member

    This is good stuff!!
     
    Dano likes this.
  4. ToddsGS

    ToddsGS Founders Club Member

    Awesome! Let me know if you want to sell it our Loan it. I'm fine with either . . . .
     
    Brett Slater and Dano like this.
  5. Brett Slater

    Brett Slater Super Moderator Staff Member

    Todd,

    I also have that rubber clutch boot and both correct ribbed, thick walled overflow hoses if you ever get a chance to chat with your rubber guy...
     
    ToddsGS likes this.
  6. George D.

    George D. Platinum Level Contributor

    I’ll send it if not tomorrow, by Wednesday.

    you want the small bolt and bracket, correct?

    It’ll be a loaner, as it is for my 70 4 speed…
     
    ToddsGS likes this.
  7. ToddsGS

    ToddsGS Founders Club Member


    Correct. If you have the bolt I'll take that to so I can match it up . . . .
     
  8. George D.

    George D. Platinum Level Contributor

    They will both be in a zip lock bag…
     
    Brett Slater and ToddsGS like this.
  9. ToddsGS

    ToddsGS Founders Club Member

    Much appreciated!
     
    Buicksky and Brett Slater like this.
  10. ToddsGS

    ToddsGS Founders Club Member

    Update on this project. . . .

    The program has been written. Waiting for the steel to arrive and then we'll have a batch ready for sale . . . . .

    .
     
  11. '65softtop4

    '65softtop4 Well-Known Member

    Todd,
    When did Buick come out with a 4 speed neutral safety switch? '68?? That was not installed on the clutch pedal.
     
  12. ToddsGS

    ToddsGS Founders Club Member

    Not sure but it's something we see on the 1970 - 1972 Models . . . .

    .
     
  13. George D.

    George D. Platinum Level Contributor

    Todd- 100% on a 69 as well….
     
    Buicksky and ToddsGS like this.
  14. BrianTrick

    BrianTrick Brian Trick

    69-72 on the pedal
     
    Buicksky likes this.
  15. Dano

    Dano Platinum Level Contributor

    I'll have to check and see if either/both of mine are present. Will yours have the offset formed?
     
  16. ToddsGS

    ToddsGS Founders Club Member

    Updated 10-14-2021
     
  17. Brett Slater

    Brett Slater Super Moderator Staff Member

    Awesome!!
     
    Dano likes this.
  18. Dano

    Dano Platinum Level Contributor

    Nice! I'll check mine out & see what I need.
     

Share This Page