1970 Skylark 2-door hardtop

How are the front fenders?

 

Front fenders have holes at the bottoms and a selection of dings and dents. I’m cutting the inner aprons off with the 70 numbers and maybe get ambitious someday.

 

I figured you were keeping but since nobody has asked...

 

Great, thanks. I need to talk to you about restoring a '70 8.2" posi axle anyway. Have an NOS 3.91 R&P to go in it. I'll get with you on Facebook messenger after the first of the year.

 

Sounds good Jim.

 

Brian, I am looking for:
1. black interior soft trim like the two windlace pieces;
2. the (whatz-it-called) soft trim around the side glass (between the headliner material and the glass) and the trim at the top of the windshield (between the tops of the R & L 'A'-pillars;
3. the rear 'C' pillar/interior sail panels (where the HT round lights are mounted); and
4. black covers for the R & L (front) seatbelt reels.

Are these is good shape? Pics?

 

I have all of the black windlace from this car and a few others. I don’t have any spare door jamb windlace,but I have all the upper pieces. I’ll get a better look at these sail panels when they are out.

 

Brian, please put me in-line for those items. Thanks.

Seat belt reel covers available?

 

Seat belts or covers not available.

 

Hawken,
These are the sail panels.

 

Hi Brian,
The other items I got in line for I shouldn’t need pictures on other than the alternator date/amps but could I get pictures of the front & rear door panels and that right rear wheel well trim condition as time allows please.

Merry Christmas!

Fritz

 

Brian, please save those sail panels for me along with the soft interior window trim (R&L window openings, windshield headre and back glass surround) ... when you are able to get to those. Thanks.

- Ken

 

Alternator on this one is blank. Had a paper sticker on that section,so it must be some sort of replacement that someone installed the original pulley onto.

 

The trim piece that the windshield wipers slide down at the base of the windshield - is that available and in good shape ? If so what are you looking at with shipping to 83687?

 

RTOM
I have at least 10 of those. Not bent or dented,just need polished. I have the wide ones for hidden wipers and the narrow ones for standard wipers.

 

I will need a wide one and if you have the mounting screws that would be great too

 

I'm going to jump in-

1. EGGSHELLS!!!
2. Dash harness including fusebox... As long as it isn't cut up anywhere...

 

I have the driver’s side fenderwell out. Nice,rust-free piece with all of the square nuts intact along the outer lip,and no drilled holes or modifiications.

 

Brian,
Just checking on these parts per prior conversation:
1. black interior soft trim like the two windlace pieces;
2. the (whatz-it-called) soft trim around the side glass (between the headliner material and the glass) and the trim at the top of the windshield (between the tops of the R & L 'A'-pillars; and
3. the rear 'C' pillar/interior sail panels (where the HT round lights are mounted).

Thanks.

- Ken

 

I didn’t forget. I just haven’t removed it yet.