Does anyone know if the" build sheet codes and the production order body-final sheet codes" are the same as far as the codes go. I have the production sheet but not the other. Im trying to figure out what all the codes are.Thanks
post up a picture if you can and we'll help you out. If you can't post pics ... let me know and you can fax it to me and I'll get it up.
Bryan, The Production Order Body Final sheets (POBF) are the buildsheets for Flint production vehicles. The codes on them are all Manufacturer codes and are different from UPC or Fisher body Sales codes. I decode these sheets, and charge a small fee to do this. It took me years of cross-referencing all the codes to figure them out. I think its $20.00 for a (POBF) sheet, and what you get back is a nice representation of the buildsheet with all the decoded info on the back. If you are interested let me know and I will get you a list of the info I need off the car to do this. There are only a few 69 Stage 1s with buildsheets, so if you have one that would be quite something. Duane
Thanks for the replys guys-I do have the POBF sheet,its a little dark in some areas and has a little tear up by the first two digits of the model but its all intact. I am going to see if I can scan or copy it,then Ill figure out what to do. I will let you know Duane
Duane, You helped me authenticate mine some time ago. Do you offer the same service using the punch card? Thanks, James
James, Yes I also do the IBM 80 column punch cards. I made a key that I can slide across the card to decode it, so if I get a copy that is full size it works great. I don't remember what I charge to decode them but I can post the list of buildsheets/etc that I decode with the fees plus info I need to do it, later today if you want. The IBM 80 Cards are pretty cool. I decoded one that was dripping with oil and had no writing on it whatsoever. The punch outs held all the info. I validated a pretty expensive car with that one.:laugh: Duane ---------- Post added at 11:38 AM ---------- Previous post was at 11:11 AM ---------- Here is my info for the build sheet decoding service. The (POBF) & (POCP) should be $20 not $25, but everything else is correct. Enjoy Duane BUILD SHEET DECODING ORDER FORM For Skylark & GS (A-Bodies) only Build Sheets from the Flint Production Plant (Buick Motor Division) Description Prices 1968 Production Order Body Final (POBF) $25.00 1968 Production Order Chassis Paint (POCP) $25.00 1969 Production Order Body Final (POBF) $25.00 1969 Body Shop Inspection (BSI) $25.00 1970 Production Order Body Final (POBF) $25.00 1970 Body Shop Inspection (BSI) $25.00 1971 Production Order Body Final (POBF) $25.00 1971 Production Order Chassis Paint (POCP) $25.00 1971 Body Shop Inspection (BSI) $25.00 1972 Production Order Body Final (POBF) $25.00 1972 Production Order Chassis Paint (POCP) (Early) $25.00 1972 Production Order Chassis Paint (POCP) (Late) $25.00 Build Sheets from all other Production Plants (General Motors Assembly Division) Description Prices 1968 Large Build Sheet (GMAD) $50.00 1969 Large Build Sheet (GMAD) $50.00 1970 Large Build Sheet (GMAD) $50.00 1971 Large Build Sheet (GMAD) $50.00 1972 Large Build Sheet (GMAD) $50.00 Note; if you want the UPC codes also decoded for the (GMAD) sheets, there will be an extra $10.00 fee charged, and you will receive a second decoded sheet. What you will receive back for these sheets (Via Snail Mail) is a nice representation of the original Build Sheet that can be displayed at shows. In large Red letters across the middle of the sheet will be the word REPRODUCTION and a warning of the same at the bottom. On the reverse side will be a list of the codes along with the decoded information. Broadcast Sheets from all Production Plants (Fisher Body) Description Prices 1965 Fisher Body Sheet (BROADCAST) $35.00 1966 Fisher Body Sheet (BROADCAST) $35.00 1967 Fisher Body Sheet (BROADCAST) $35.00 What you will receive back (Via Snail Mail) is a nice representation of the original Build Sheet that can be displayed at shows. In large Red letters across the middle of the sheet will be the word REPRODUCTION and a warning of the same. On the bottom will be the decoded information, including the Fisher Body option codes. I also decode the following items for all Production Plants. Description Prices 1968-1972 Protect-O-Plates (POP) $20.00 1969-1972 Glove Box, Location Cards (IBM 80 Punch Cards) $25.00 Also 1970 & 1972 Sloan Information Packets $20.00 What you will receive back (Via Snail Mail) is a list of the codes along with the decoded information in an easy to read format. Disclaimer: I decode only Original Build Sheets. This does not mean your car was built in accordance with these sheets, I have found errors in the past. Also I will not create a Build Sheet for a car, so dont even ask. Items NEEDED to be included with the order. (Via Snail Mail Only) 1. Full Name 2. Address 3. Phone # (With times to call, in case I need to ask a few questions.) 4. Fax # and/or E-Mail Address (If applicable) 5. Paper copy (Not Original) of Original Build Sheet (Cleanest Untouched Paper Copy) (Fax and/or e-mail copies are often too hard to read) (Clean e-mail copies can be sent in addition to the paper copies if available.) 6. If needed a Second copy, with the codes Inked in to make them more legible. 7. Full Vehicle Identification Number 8. All information from the Fisher ID Plate on the firewall 9. Check made out to: Classic Car Interiors 120 President Ave. Rutledge, Pa. 19070 Tel # (610)-544-6776
How do you know if its a stage 1,where thier any stage 1 with the 350? Hope its not stupid question just a new guy on the block....thanks a.j.
