1968 Buick 350 V8 Engine 4 Barrel Intake Manifold

Discussion in 'Parts wanted' started by Benwin, Nov 12, 2009.

  1. Benwin

    Benwin New Member

    Hello I am looking for an intake manifold for buick 350 4 barrel. Is this the same intake manifold on all the 350 buick?

    Thank you !

    Benwin
     
  2. corkgs

    corkgs Well-Known Member

    I have a 71 $75 plus shipping 17569
     
  3. Benwin

    Benwin New Member

    Do you have pictures? Do you know if the intake manifold is the same throughout the 350 buick?

    Tank you !
     
  4. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    I have a 70 intake for $50 plus shipping where are you located?
     
  5. techg8

    techg8 The BS GS

    There are differences.

    the 68-9 intakes have round pedestals that hold up the rear part of the carb baseplate where the carb bolts go, while the 70s units have a solid metal pad as a provision for the second pulloff can vacuum channel in the baseplate.

    There are different styles of Choke thermostat

    Some have the AIR passages
    Some have EGR

    That said, they all are interchangeable on any 350, you might just have to block/plug the AIR or EGR or whatever.

    Thats all I can think of off hand
     
  6. sean Buick 76

    sean Buick 76 Buick Nut

    My advise is search your area and call the wreckers, shipping is killer on there!
     
  7. gransportw

    gransportw Well-Known Member

    HI i have two from 68-69 buick 350 4bl. do you live near michigan thanks gransportw
     
  8. grndprxdriver

    grndprxdriver Member

    I am Interested in locating one also
     
  9. DEADMANSCURVE

    DEADMANSCURVE my first word : truck

    yeah - keep an eye out for yards that maybe don't crush all the older stuff . when you are out cruisin peek out behind them barns etc . if ya know some guys that have older stuff they drive ( chev ford mopar anything ) alot of times they know people that know people . check with the old dudes at the car parts counters . sometimes buying a whole car is good , use a few parts , sell a few parts . and use wise purchasing skills so ya don't spend more than ya should . del
     
  10. 67 Post GS

    67 Post GS Well-Known Member

    I have 71 buick 350 4 barrel intake $75.00 & shipping. Thanks Ron
     
  11. DansGS

    DansGS Well-Known Member

    I have one from a '68, $125/shipped
     
  12. grndprxdriver

    grndprxdriver Member

    Dans gs Im in Ontario Canada. shipping still good?
     
  13. DansGS

    DansGS Well-Known Member


    $175/shipped to Canada
     

Share This Page