Hello V8. Let me just start this by saying I am very new to this. I am about to embark on a never before done journey by myself, by tearing down...
Help, I have no lights on the front of my car. No headlights, parking lights, signals or markers, where is a good place to start looking? I did...
OK, my dumb question for today, Is there insulation that goes between the headliner and the roof of the car?? If so does some body reproduce the...
OK Guys I need some help. First where is the best place to buy a black headliner for a 1970 GSX? Second the insulation that goes under the...
Hey all, I'm currently working on rebuilding the wiring to my Skylark, and I have a small hiccup in my plans. Since my original wiring diagram...
Hello All, I am looking for a decent mirror gasket for 1970 GS Sport mirror. The ones I took off are part number 9827788. One is OK , maybe, the...
Hey guys, I'm finally posting a thread, because I've hit a wall on what to do next. So I'm having oiling issues. I get 40lbs at start up when it...
Here is my new problem, the new MSD distributor is too tall to allow my air cleaner to sit on the carb. It is an MSD 8552 installed in a 1970,...
HELP!!!!! Ok here are my problems. One the repop mirror gaskets I bought from Cars Inc are too thin and the mirrors set cocked. The repop...
I need to replace the shocks on my 70 GSX. It is a Stage 1 plus a little build on the engine with a stock transmission. What type and brand of...
Did the 1970 GS have the felt pad under the package shelf when it came from the factory? Thanks Jim
Where can I purchase the staples that hold the rubber strip located under the rear bumper? I am going to use 2 inch by 1/8 inch neoprene. Any...
Just wondered if it is possible to polish the lens on the clock in my 70 GS. I was going to try plex polish first and if it did not polish out I...
I have found the two screws in the glovebox of the console and I can take apart the shifter. What else holds it in place. Is there a thread I...
Hi Guys, I am in need of 2 quarter panel extension nuts for a 1970. Anybody have any they want to sell? They are a flanged nut. Thanks Jim
Hi everyone, new to this site. I recently bought a 71 skylark that has a issue no crank issue. i was able to get it running by tapping into...
Well, it's finally here. I hope this new site will give you a better experience using V8Buick.com. I will do my best to stay ahead of any...