I'm beginning to clear out some parts I bought and never used. This is one of Rob Giroux's beautiful billet thermostat housings. Never installed,...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I have a complete intake to oil pan 1975 455 with stock low...
I bought a manual flywheel for a BBB from a board member and a clutch/pressure plate. It turns out they are the small pattern on the flywheel,...
I’ve built a few motors before, but this is my first BBB. I picked up a set of 71 standard 455 heads that were supposedly gone through a while...
Engine is a 70 standard bore .I was going to keep this engine for a backup. All new fresh bearings .(standard size) Oiling mods done . New oil...
Hi all, i have rebuilt my engine and discovered the heads are cracked beyond reasonable repair. July last year ordered a set of aluminium heads...
I'm looking for a 67-70 crank pulley for a 455 with a/c part # 1375143. It's going on a '70 Stage 1 convertible show car.
[ATTACH] [ATTACH] Hello all, I am currently in the process of swapping a 73 Buick 455 into a 79 C3 Corvette, originally this started out with me...
For sale 1970 buick lesabre custom 455 $5500 obo Located in Jacksonville ArkansasFor Sale 1970 Buick Lesabre Custom 455 daily driver a/c car....