Hi everyone, got my entire set up from Jamco for my brakes to convert to discs. I have a 1967 Buick riviera. Bigger Cam and redone motor-430. Was drums on the back originally and disks on the front. Having problems with proper stopping power and have had my mechanic who I trust go over everything and have also looked at it myself. Added a vacuum pump for extra stopping power, hasn’t worked. I have proper pressure getting to my breaks but still doesn’t seem to grab properly. Has anyone had any issue with these kits? I changed the pads over for the front brakes and it seemed to make a difference. Below is what I have purchased from jamco. The customer service is very poor and this is why I’ve tried to relay this on a forum for advice. •RDB6369R* 1963-69 RIVIERA REAR DISC BRAKE KIT https://www.jamcosuspension.com/product/1963-73-buick-riviera-rear-disc-brake-kit-rdb6369r •DBC6669* 1966-70 BUICK RIVIERA FRONT DISC BRAKE CONVERSION https://www.jamcosuspension.com/pro...viera-front-disc-brake-conversion-kit-dbc6669 •PBB6369DD BBD009S MCA0001* POWER BRAKE BOOSTER 9" SLIM SINGLE DIAPHRAGM CORVETTE STYLE MASTER CYLINDER, 1" BORE (9/16 1/2 PORTS) https://www.jamcosuspension.com/product/1963-69-buick-riviera-power-brake-conversion-pbb6369 SMB100 PV0003 LEFT SIDE MOUNT PROPORTIONING VALVE BRACKET - ZINC GM STYLE PROPRTIONING VALVE (DISC/DISC) BRASS PVLSM38 PRE77 BBV0001* Zinc Brake Lines for Left Mount Bracket Proportioning Vale. 1/2" to 3/8" & 7/16" to 3/8" Fittings BRAKE PEDAL ROD EXTENSION 3/8" DIAMETER HOLE 2-1/2" LONG 1963-69 BUICK RIVIERA POWER BRAKE CONVERSION (DISC/DISC) COMBINATION AND PROPORTIONING VALVE BLEED TOOL VH0001* 3 FOOT RUBBER BRAKE BOOSTER VACUUM LINE
Bump! I'm thinking alot missed this. I can't help as I have never converted to full disc's. Maby re post this on the Bench or the Whoa and Sway Thread..