Open chat thread for Buick 350 Camshafts

Discussion in 'Small Block Tech' started by sean Buick 76, Oct 16, 2013.

  1. sean Buick 76

    sean Buick 76 Buick Nut

    I think you have a good plan, it should run nice! Wasn’t it you that had a super high mileage 74 Buick 350? About 400,000 miles if I remember correctly? I could be mixed up but for some reason I thought it was you.
     
  2. Mart

    Mart Gold level member

    Too small.....
     
  3. Fox's Den

    Fox's Den 355Xrs

    308s for the small block go big or go home... boo

    625 is ok but hp Will be on the table
     
  4. Fox's Den

    Fox's Den 355Xrs

    Here is what I am thinking
    Schneider 284-92F solid lifter
    gross intake 284
    exhaust duration gross 292
    intake .050 duration 248
    exhaust .050 duration 258
    intake lift 1.6 rr 528
    exhaust lift 552
    lobe sep 108
    valve lash .020
    rpm range 2800-6300
     
  5. Mart

    Mart Gold level member

    You were supposed to buy that cam already with your stimulus check..:)
    Let's get going on that.....:D
     
  6. alec296

    alec296 i need another buick

    Some big numbers at .050 .
     
  7. Fox's Den

    Fox's Den 355Xrs

    smaller than the first cam I used. that one was 255-265 576 I E

    Iknow I should have ordered it already

    I had to talk to the professor...me
     
    Last edited: Feb 23, 2021
  8. Mart

    Mart Gold level member

    Spend that stimulus cash $$$.:D

    I like that solid cam.
    It's only 3 numbers larger than my roller @ .050, but 15 numbers smaller on the advertised #.
    Should be a "runner".:)
     
    Last edited: Feb 23, 2021
  9. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    :D:DOther people's money:D:D Buy that cam.:rolleyes: Just check with the boss so you don't end up in the dog house.:)
     
  10. Mart

    Mart Gold level member

    :D:D:D I think that cam would rock. Would be even better in the roller version.

    Get going professor!
     
  11. Fox's Den

    Fox's Den 355Xrs

    Boss is ok :cool:with it I had run up credit card a lot past few years but catching up now. Can't wait to spend other peoples money maybe they will give me more after all I deserve it I worked my butt off being a printing pressman

    Well now I wonder how hard it is going to be to get the cam and especially the lifters
    So now that I am talking about this should I get the lifters with hole in bottom to oil cam?
    Seems to make sense to me to get that style of lifter My oil pressure is good 50@3 grand 70@6

    27th year this year on the motor since major rebuild, seems to have proved its' longevity and I did not drive it like a turtle.

    Hitting 6200 on the rev limiter out of low gear on 125 shot of nitrous and not lifting and shifting into second should have ended the motor when I raced that Mustang in 2006.

    but it didn't...

    keep that in mind fellow gearheads :D
    I forgot Of course he lost
     
  12. Fox's Den

    Fox's Den 355Xrs

    Would really like to see someone do the 608 TA cam do 12.5 comp let it all hang out.
    Call JG Wentworth he's got the cash! :D
     
  13. Mart

    Mart Gold level member

    Right on.... cam saver lifters being flat tappet is good idea.

    Stop professing, Let's get this going....:D
     
  14. sean Buick 76

    sean Buick 76 Buick Nut

    I’m currently doing a NA 13:1 350 with the largest roller cam ever made. Should make some steam. Just waiting for my head porting guy to recover from shoulder surgery.
     
    MrSony likes this.
  15. Mart

    Mart Gold level member

    Got a cam card to post?
     

    Attached Files:

  16. sean Buick 76

    sean Buick 76 Buick Nut

    Here
     

    Attached Files:

  17. Mart

    Mart Gold level member

    Jumbo muthur thumper.
    I've been outcammed.:D When can we expect to see it happen? Gonna need some relief for those lifts.
     
    Last edited: Feb 23, 2021
  18. gscalifornia

    gscalifornia Small blocks rule!!

    Anyone going to be in Bowling Green testing any new 350 builds? Or, letting their 27yr old builds stretch out?
     
  19. sean Buick 76

    sean Buick 76 Buick Nut

    Yes large valve reliefs for the oversized valves. I have all the parts ready it just needs final assembly and then it can be fired up. Should be this spring.
     
  20. Fox's Den

    Fox's Den 355Xrs

    I have to make a phone call to Schneider the lifters with the hole in bottom must not be available could not put in cart.
     

Share This Page