Been reading on the Gear Vendors website.

Discussion in 'Small Block Tech' started by Mark Demko, Dec 25, 2020.

  1. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    With 31" tires, those 4.11's are like a 3.52, and the GV brings that down to 2.75 final drive. That's about the same as my 3.73 with 28" tires, 3.55 to 2.77. The GV is good to 1200 HP, and they can modify it to take 2000.
     
    Mark Demko likes this.
  2. Mart

    Mart Gold level member

    You haven't even got your street eliminator heads yet and you're changing trannys already.o_O:D
     
    Mark Demko likes this.
  3. sean Buick 76

    sean Buick 76 Buick Nut

    Leave your trans and rear end alone and just add a 75 shot of nitrous on the engine, done.
     
    Mark Demko likes this.
  4. Mark Demko

    Mark Demko Well-Known Member

    HAHAHA, just pondering really, geez, winter just started and Im bored already:rolleyes::rolleyes::rolleyes::rolleyes::p
     
    docgsx likes this.
  5. 436'd Skylark

    436'd Skylark Sweet Fancy Moses!!!!!

    I wouldn't bother with OD with 3.42 gears.. no need to.
     
    Mark Demko likes this.
  6. Fox's Den

    Fox's Den 355Xrs

    I haven't broke mine yet and you know how many passes I made on that 200 with a full blown 125 shot which makes the 350 put out 500 hp and about 500 ft lbs

    I had numbers over 400 for both on a rear wheel dyno back in 2007, with the 125 shot.

    Plus I have that very stiff suspension with the big sway bars and all the other crap to make the car handle like a modern car.

    I should have broke it a long time ago

    Feel like spending 500 bucks...put on a 150 shot of nitrous on that car it won't care about that 342 gear you got!
     
    Mark Demko likes this.
  7. Fox's Den

    Fox's Den 355Xrs

    I bet you can click off an 11.50 at Quaker I was running 13.85 there on the motor and went 12.39 on nitrous there this summer with a 75-80 shot.

    you should be able to do that 11.50 easily with a 150 shot, got nothing else to do this winter. buy all the extra jets too so you can go smaller like I did.

    yours will scream on it with that roller cam and that intake spin that baby to 6300 you got the bottom end

    cheaper than that trainee

    oh come on it wont blow up you got newer stuff than I do I hit the rev limiter at 6300 on mine when I first used it racing a Mustang with a charger, banged second and pulled a fender. didn't blow up either, that was 50 nitrous trips down the track ago, at least, and 12+ years ago
     
    Mark Demko likes this.
  8. Mark Demko

    Mark Demko Well-Known Member

    Thats the thing Im leery about, someone to build a "strong" 2004R.
    Im sure Vince Janice could, but would he actually be the one building it, or one of his employees?
    Another thought I had was these transmissions were behind castrated tiny V8's, 140 to 180 HP Olds 307's and some Buick 4.1 V6's
    I imagine the discussion in Buick's R&D back in '87 " Ok, we built an awesome turbo V6, 245 hp, 355 ft.lb's of torque, were going to use a 3.42 gear, WTF we going to use for an overdrive trans?"
    "Well we have the 2004R, we can beef it up a bit, it should be ok"
    I've been watching Precision Transmission vids on You Tube, Pretty good stuff, Rich knows his stuff it seems.
    He commented about the T350 trans. second gear clutch is huge, but third gear is its weak spot.
    Seems its 6 of one and half dozen of another:rolleyes:
    The GV seems to be my best bet if and when:cool:
     
  9. Mark Demko

    Mark Demko Well-Known Member

    I have JW's 9.5" convertor, had him re-stall it to 3500, its an awesome convertor:D
     
  10. Fox's Den

    Fox's Den 355Xrs

    Vince has his son working for him and before all that Vince's dad was the one running the place. That is how long I have been working with him. 1983
     
    Mark Demko likes this.
  11. Bens99gtp

    Bens99gtp Well-Known Member

    To me for your car the only advantage to going gv, might be the very few times in life were 2ndod might benefit you. This happens in trucks towing more than cars.......especially since we don't have any big hills here in northern Ohio.

    The 2004 is just about the same case size as a 350 on the od......uses the same yoke. Uses a th400 cross member location, and can be built to more than handle the power even the average 350 can dish out easily. Even having one built and and new tq will be less than gv. And you can recoupe some money by selling your proven stuff off.
     
    Mark Demko likes this.
  12. Mark Demko

    Mark Demko Well-Known Member

    Maybe I could sell it to Guy (grumpy):p:p:cool:
     
  13. Fox's Den

    Fox's Den 355Xrs

    I got a 350 trans sitting here with my old nice loose 3500 stall convertor built by Janis Trans

    Watch the clock go back and forth go back and forth go back and forth tic tock tic tock tic tock

    Think 125 nitrous kit have to beat Grumpy er I mean Guy:D
     
    Mark Demko likes this.
  14. Mark Demko

    Mark Demko Well-Known Member

    LOLOL:p:p:p:p:p:cool::cool::cool::cool:
     
  15. Jim Weise

    Jim Weise EFI/DIS 482

    Mark,

    If you do go with the OD trans, I can build you the exact same converter you have now, to fit the 200 trans.. Can do it with, or without the triple disc Kevlar lockup clutch. Figure $629 without the clutch, or $765 with it.

    JW
     
    Mark Demko likes this.
  16. alec296

    alec296 i need another buick

    Janis has a very good reputation for the grand national guys. I don’t think you would have much issues.
     
    Mark Demko likes this.
  17. Mark Demko

    Mark Demko Well-Known Member

    Thats the year I graduated:p
     
  18. Mark Demko

    Mark Demko Well-Known Member

    Thats why I took my 350 trans to him, his rep is good and hes local:D
     
  19. Mark Demko

    Mark Demko Well-Known Member

    Thanks Jim, good to know!
    Ughhhh, I gotta stop thinking about stuff:mad:
    I think I'll focus right now on engine power, my aluminum heads, and see what that nets me at the track, and go from there.
    Seems like the 2004R is the way to go, but I'll cross that bridge when I get there:D:D
     
  20. Mart

    Mart Gold level member

    I have a D-5 lockup Gran Nat convertor I'll sell you...:D
     
    Mark Demko and Fox's Den like this.

Share This Page