ISO: 1964 buick 300 cylinder heads needed

Discussion in 'Small Block Tech' started by John Griffin, Jul 24, 2020.

  1. John Griffin

    John Griffin Member

    I have a 64 skylark with a 300. The heads are in rough shape and I am trying to find a set of replacements. Don't want to go to cast iron if I can avoid it.

    John
     
  2. Alssb

    Alssb Well-Known Member

  3. gsfred

    gsfred Founders Club Member

    Should have a cast iron set if you don't find aluminum.
    Fred
     
  4. John Griffin

    John Griffin Member

    Thanks.. Cast iron heads are much more common.. Want to avoid that if I can..
     
  5. philbquick

    philbquick Founders Club Member

    I have a real nice set.
     
  6. John Griffin

    John Griffin Member

    Phil, That's awesome.
     
  7. Pelicano

    Pelicano Member

    I have a pair of 64 aluminum heads sitting on a shelf. They were shaved, slightly ported, and have oversize intake valves. Barely used because the overbored 215 block cracked! I am flying to Martha's Vineyard Wednesday, be at daughter's home for a week. $300 plus cost of them as checked baggage.
     
  8. John Griffin

    John Griffin Member

    I was looking for 300 (V8) heads... I think I have a set.. Thank you though
     
  9. Jim Blackwood

    Jim Blackwood Well-Known Member

    John, I think he is talking about 300 heads. They are a popular upgrade to the 215.

    Jim
     
  10. Pelicano

    Pelicano Member

    Did you ever get 1964 aluminum heads? Mine are still sitting on shelf and I am heading for MA soon. I have never tried to sell them. The offer is still good.
     
  11. gsjohnny1

    gsjohnny1 Well-Known Member

  12. philbquick

    philbquick Founders Club Member

    I have a complete 64 300 that needs rebuild for $350. I also have a real nice set of heads for $450. PM me if interested.
     

Share This Page