New product: Vacuum advance Limiter Bushings

Discussion in 'Products' started by techg8, May 20, 2019.

  1. techg8

    techg8 The BS GS

    Performance cammed engines want a performance ignition timing advance curve.

    More initial timing, a specific amount of mechanical advance, and a LIMITED amount of vacuum advance. Especially with high compression engines it is important to tune your advance curve to avoid detonation.

    Everyday Performance LLC has produced a set of Vacuum advance limiter bushings to make reducing and tuning your vacuum advance an easy task.

    DSCN2320.JPG

    No more drill bits, clamps, epoxies, welding......HASSLE.

    Simply install the color coded limiter bushing of your choice onto the vacuum advance shaft as shown, and install your vacuum advance can onto your distributor.

    DSCN2322.JPG

    This limited production run has 4 color coded sizes (installed on B1 can with 16deg available advance)
    (The vacuum can is limited to the degrees listed)
    black = 5deg
    Silver = 7deg
    Gold = 9deg
    Red = 11deg

    Now it is easy to tune your maximum vacuum advance and avoid detonation/pinging at cruise. Get back your fuel mileage and throttle response.

    Each kit of 4 color coded bushings costs $25 shipped in the USA
    Limited Quantities available in the web store:

    http://everyday-performance.com/sto...nce-bushing-kit/p/139273257/category=21548473
     
    Last edited: May 21, 2019
  2. DauntlessSB92

    DauntlessSB92 Addicted to Buick

    Ken, I'll take a set. Where can I order?
     
    techg8 likes this.
  3. techg8

    techg8 The BS GS

    Last edited: May 21, 2019
  4. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Good idea Kenny. I guess the dimensions are such that it won't bind in the slot?
     
    techg8 likes this.
  5. mrolds69

    mrolds69 "The Cure"

    OMG Ken, this is a magnificent idea!!!
     
    techg8 and johnriv67 like this.
  6. Cutlass

    Cutlass Platinum Level Contributor

    Ken, I will take one set. Great idea, simple but genius.
     
  7. DauntlessSB92

    DauntlessSB92 Addicted to Buick

    Money sent, thanks Ken!
     
    techg8 likes this.
  8. 87GN_70GS

    87GN_70GS Well-Known Member

    Works for all types vac advance cans?
     
    techg8 likes this.
  9. techg8

    techg8 The BS GS

    No problems with binding. It's a narrow fit but sufficient for articulation of the unit.
     
  10. techg8

    techg8 The BS GS

    They are based on the B1 and B22 cans with 16 degrees advance stock.

    But yes they will fit a B22 or most any other can with a shaft that is 5/32"

    It bears mentioning that they can be made to any size. I simply picked 4 sizes I thought most useful.
     
  11. DauntlessSB92

    DauntlessSB92 Addicted to Buick

    Just tried one out on a crane adjustable vacuum advance can and, since the crane unit has more travel than a stock can, the black limiter put me at 6* of vacuum advance. The silver or gold should put me right where I want to be.

    It is nice to have the piece of mind that my vacuum advance will be firmly limited. I much prefer this versus having to drill and tap a hole to relocate the crane limiting cam. The screw for that cam is also difficult to get to without using a handpump to move the advance plate.

    Thanks for another quality part Ken!
     
    techg8 likes this.
  12. Redmanf1

    Redmanf1 Gold Level Contributor

    Good info^^^^
     
  13. techg8

    techg8 The BS GS

    Thank you for the feedback and the good info!
     

Share This Page