WTB: Cowl Screen for 1970 Skylark

Discussion in 'Parts wanted' started by tminihan, Feb 22, 2019.

  1. tminihan

    tminihan 1970 GS455 Vert - Project

    Recently purchased one from TPP and it is too short, now looking for an original. I have the H clips. Thanks, Tom
     
  2. BIG FRANK JOHNSON

    BIG FRANK JOHNSON Well-Known Member

    Tom take it to a hardware and see if they can match it. Then just trim it. Frank
     
    BuickV8Mike likes this.
  3. Black69Judge

    Black69Judge Well-Known Member

    I have an original wire mesh from a 69 GTO
    1/2 " ?? squares

    Scott
    2o6 465 9165
     
  4. BuickV8Mike

    BuickV8Mike SD Buick Fan

    My 1969 is one piece, is that what your looking for? It seems identical to old school industrial window screen material. I could send you a template. Cheers, Mike
     
  5. Black69Judge

    Black69Judge Well-Known Member

    I have a spare ...
     

    Attached Files:

  6. moleary

    moleary GOD Bless America

    Hey Scott, the Goats are 1/2” heavy gauge and Skylark is 1/16” medium gague.
     
  7. DasRottweiler

    DasRottweiler -BuickAddict-

    My 70 is a one piece, window screen material. If you can't find one here on the board, you could make one (or several for resale) using "pet screen". A bit more rugged than regular metal window screen material. Maybe take BuickV8Mike up on his template offer, after verifying 69 and 70 are the same? Jim
     
  8. CJay

    CJay Supercar owner Staff Member

    Originals have a molded in bump above the wiper transmission arm
     
  9. tminihan

    tminihan 1970 GS455 Vert - Project

    All, thanks for the input/offers. I should know in the next day or two if a nearby board member has one. If not, I'll send PM's on Monday. Thanks, Tom
     
  10. Brian Albrecht

    Brian Albrecht Classic Reflections

    I have one
     
  11. tminihan

    tminihan 1970 GS455 Vert - Project

    Hi Brian, PM sent.
     

Share This Page