Wiseco pistons going to Norwalk

Discussion in 'Parts for sale' started by 462 GILLEY, Apr 17, 2014.

  1. 462 GILLEY

    462 GILLEY Well-Known Member

    I have a set of Wiseco flat top pistons 11 to 1 compression. This is a set of 8 pistons, 8 floating pins with retainer clips and a full set of rings. These are still in the original box.

    I tried this in a mock up engine but the compreeeion was going to be too hi for the street and pump fuel.

    bore 4.30
    piston style flat top with 2 reliefs
    material forged aluminum
    compression distance 1.98in.
    wrist pin floating
    pin diameter 1.00 in.
    top ringfacing material plasma-moly
    second ring 1/16
    second ring material iron
    second ring facing material cast iron
    oil ring 3/16
    oil ring material stainless steel
    oil ring tention standard

    Last year Summit sold this kit for $630.00

    I will sell them for $500.00
    Mike Gilbert
     
  2. eganddg

    eganddg Well-Known Member

    Interested pending picture and actual part number... 4.350 bore?
     
  3. 462 GILLEY

    462 GILLEY Well-Known Member

    Hi Dave

    I was looking for the piston kit in the Summit web site, but they didn't have the complete kit, and I didn't think to get the new piston #.
    The Wiseco # for this piston kit was PTO54H4. I have not gone to the Wiseco web site to check on it.
    Unforchanetly I am unable to send any photos at this time.
    These are flat top pistons with 2 valve reliefs, they also have a friction reliefe coationg on there skirts.

    Mike Gilbert
    (440)935-3623
     
  4. ronbz455

    ronbz455 Big Butz Racing

    I need them but don't know if I can get the money. I might be buying another daily driver.
     
  5. 462 GILLEY

    462 GILLEY Well-Known Member

    Yes these are 4.350 bore (sorry typo). Iam unable to photo at this time, sorry.

    Mike
     
  6. ronbz455

    ronbz455 Big Butz Racing

    I will put a photo and tell me if these are them.
     

    Attached Files:

  7. 462 GILLEY

    462 GILLEY Well-Known Member

    Yes thats them.
     
  8. ronbz455

    ronbz455 Big Butz Racing

    They would just look good for a display before I use them.
     
  9. ronbz455

    ronbz455 Big Butz Racing

    I am in line what ever it takes to get them!
     
  10. eganddg

    eganddg Well-Known Member

    Pm sent.
     
  11. mbusher83

    mbusher83 Well-Known Member

  12. 462 GILLEY

    462 GILLEY Well-Known Member

    Hey Dave

    I sent you a pm

    Mike
     
  13. eganddg

    eganddg Well-Known Member

    I'm going to pass on these. I'm thinking I will be going for a little less compression on my next project.
     
  14. ronbz455

    ronbz455 Big Butz Racing

    Thanks Gilley! Great price! Now rods. Have to start a thread on this build. I have always wanted these! Jay Lutz was great for saving me shipping by getting them from you and giving them to me. Looks like another Buick Class Act?
    Thanks, Ron Butz.
     

    Attached Files:

Share This Page