Wiring harness clips

Discussion in 'Chassis restoration' started by TimR, Feb 18, 2006.

  1. TimR

    TimR Nutcase at large

    Think we went through this a while back but can't find it. I need a source for the wiring harness clips that were used in the engine compartment. These are the shorter plastic ones on the wheelhouse, one end has an expandable design, it goes through the hole, then you wrap it around the wire harness and the other end has a tit that goes into the first end, expanding the head to keep it locked in. About 4" long, made of plastic.

    Any ideas??

    Thanks
    Tim
     
  2. GStage1

    GStage1 Always looking for parts!

  3. dreeesh

    dreeesh Well-Known Member

    plastic wire wraps

    CARSinc has them!!!!
     
  4. TimR

    TimR Nutcase at large

    Thanks....

    later
    Tim
     
  5. TimR

    TimR Nutcase at large

    ordered!

    later
    Tim
     
  6. redhenny16

    redhenny16 New Member

    The GM part number for them is 3816659, still available from the dealer.
     
  7. TimR

    TimR Nutcase at large

    Nope. Totally incorrect, have one right here. It will work but looks wrong.

    later
    Tim
     
  8. copperheadgs1

    copperheadgs1 copperheadgs1

    Stop the presses>>>>>>> Ames Performance a Pontiac resto company in New Hampshire has the exact looking repros. Cars inc. do not look at all like originals. I bought some and the heads are wrong. Ames sell both sizes with the size printed on them like "2.75" as original. I think they also have part number printed on them as well. The originals were made by Robins which is printed on the originals but not the good repros other than that they are the only ones that are correct. If you are supper fussy then go to ames as thes things are pretty cheap and why spend money twice? Cars never give refunds either. Hope this helps all you concourse freaks. I found these by accidenet at a car show once. They are the only ones i'll use
     
  9. copperheadgs1

    copperheadgs1 copperheadgs1

    Tim the Ames # for the wire strap is P101C, I am not sure if this is the 3.75 size or the 2.75 size but they had both last time i ordered. Their site says 1.50 each
     
  10. thepartsman

    thepartsman Back Ordered Again ?

    We've got plenty in stock,if you can't find them let me know.
    DW
     

Share This Page