OOoo no, just useing the posi units out of either, 74 camaro or 77 Trans am rears, and putting into my olds 10 bolt rear
Ok that posi is a 2 series with a spacer and a 3.73 gear. I would double check one bolt to be sure he used the correct longer bolts needed for the spacer. Jim
Well i drained the houseing, to take pictures and verify, what i have. This week I'm gonna drop off both rear ends at the performance shop for cleaning a rebuilding. They should have the kit and bolts for rebuilding
Question: Got some free time, and was considering takeing the old posi out of the 10 bolt houseing and all. Figured it be allot cheaper on me if i atleast took the posi unit and gear set out, of it's houseing. Instead of takeing both rear ends to the shop and haveing them take out both, install one and trash the other old houseing ?
What you guys think, should i pull the posi/gear set out, of the houseing ? or leave for shop to do both
okay guys on another post you notice that I broke one of my axles, on the earlier pictures, of the rear end in my car. Now i need help locateing and understanding a certain type of axle.and by the way anyone know where jim (monzaz) is, if so let him know I'm looking for a him.. found a 28 spline,bolt in ,press on bearings axle, at the local salvage yard out of a pontiac rear, but just found out not the same, one axle has a bearing ring where its press or locks on ,anyone with an ideal of this
The site below is Monzaz, call him, or click on Forum/Community, and join. I'm sure Jim checks in on his own Forum more than he looks here. http://forum.jdrace.com/ www.jdrace.com