What should i expect?

Discussion in ''Da Nailhead' started by Damian Kolosik, Dec 9, 2003.

  1. Damian Kolosik

    Damian Kolosik Well-Known Member

    Ok everyone im wondering what kind of power should i expect from my nail head. its a .060 over 401 im gonna be running 10.5:1 forged pistons with pocket ported heads and larger valves i think some where in the range of 1.550 exhaust and 1.94 intake maybe a little bigger i dont have the paper in front of me with the sizes, anyway my cam is either going to be a t/a 30 or 25 the 30 is a .480/.480 lift cam with a 224/224 duration @ .050 the 25 is a .475/.480 lift cam with a 218/224 duration @ .050. my headers are a set of 1 5/8 t/a shorties and my pipes are going to be 2 1/2 in with 40 series flowmasters. id be happy with an estimate of what i can expect from this motor torque and horsepower i know alot of you have probably built nailheads in the past so i hope you can shed some light on my question and help me on my quest to kick the hell out of those jap crap cars ...:TU: :stmad:
     
    Last edited: Dec 9, 2003

Share This Page