What is a 401 worth?

Discussion in ''Da Nailhead' started by 1 BAD 65, Jan 28, 2006.

  1. 1 BAD 65

    1 BAD 65 Well-Known Member

    I have a complete 401 from a 65 gs. Just got the car, so don't know if it runs yet. Also, does anyone know about the 2 speed trans that comes with them? I will most likly be moving the 401 if someone wants it with the trans. Just don't know how much to ask for it. So if you guys could throw me some #'s that would be great. Thanks for your time


    Chad :Do No:
     
  2. Page2171

    Page2171 Well-Known Member

    Absolutely worthless!!! Chances are you will have to pay someone to take it! I am the type of guy that likes to help people out, so I would be happy to save you that trouble and would be willing to take it off your hands free of charge. :Brow: :laugh:
     
  3. 1 BAD 65

    1 BAD 65 Well-Known Member

    yeah?

    I'm not that dumb or desperate. Someone will want it sooner or later.

    thanks for the reply
     
  4. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    depends on the condition a paid just over 300 for mine but i would have paid more for an actual gs motor with and rear sump pan and the mounts.......things ive had to buy...........put you location up it can help
     
  5. 1 BAD 65

    1 BAD 65 Well-Known Member

    good deal

    thanks for the reply. atleast someone was willing to help


    chad
     
  6. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    dont mention it .......other dude was just kidding
     
  7. DugsSin

    DugsSin Well-Known Member

    Well it would depend on if she's a runner or stuck. How many miles it has seen. Is it a single 4 barrel or 2 X 4's. Buick chrome air cleaner, Buick aluminum valve covers would add to value. Exhaust manifolds and motor mounts included?

    Is the tranny the stock 2 speed 300 that came with the car?
    Just some question I would have if you were closer.
     
  8. 1 BAD 65

    1 BAD 65 Well-Known Member

    good deal

    thanks for the replys guys. This helps alot. I will have to look into the numbers and tranns. Also the miles too. but this would be a complete set up air cleaner too mounts plus exaust manifolds. will let you guys know. Thanks



    Chad :beer
     
  9. if it's a complete carb to pan LR code motor with rear sump pan. fuel hose loops under the front 2 pan bolts and the correct 65- 66 GS exhaust manifolds and it is at least rebuildable then you can get 400-500 for it. the transmission isnt a big seller as most people go to a th400 from a 65-66 big car.
     
  10. buickbonehead

    buickbonehead WOT Baby!

    From what I understand those motor mounts are pretty rare :Do No: They are supposedly essential to clone any Skylark to a GS.

    Rick
     
  11. Babeola

    Babeola Well-Known Member

    Same goes for the GS Skylark exhaust manifolds unless you want to use headers (headers are being manufactures and are availble).
     
  12. 1 BAD 65

    1 BAD 65 Well-Known Member

    You Guys Are Great

    Thank you so much for the help. I think that she will be stuck.. All original with 67,000 on it as far as I can tell. Has original carb on it and the exaust manifolds. the motor mounts are worth something? cool, i will be moving in 2 weeks to the mid part of the state and am looking to see if anyone wants it. i need to take it out of the car yet, but soon it will be out. From what i hear it might have the two speed with a varible pitch torque converter?i don't want to be raped, but i am willing to deal with someone. I am new to buicks and numbers and codes on motors. So i will post them when i get them so you guys can help me out. will keep you posted. thanks


    chad
     
  13. Hi Chad
    did you get that motor from mark the other month
    he sold his and was wondering if your the guy that bought it
    if so
    it is a true gs motor
    exhaust was as such as well
    droped down the sides
    i looked at her but she was tight at that time
    i got the other motor from him with the tranny
    and all three old buicks
    Greg
     
  14. DugsSin

    DugsSin Well-Known Member

    Trans will be a switch pitch 2-speed. Speaking of switch pitch the funky switch up by the carb with the rubber covering is what activates this function. Another sought after piece.

    You may also have a posi rear in her that someone could always use. The center consoles bring some nice $$ if in good condition especially if it has the BUICK tach in there.

    Now if you want to move the tach I would be very interested. :rolleyes:
     
  15. nekkidhillbilly

    nekkidhillbilly jeffreyrigged youtube channel owner

    lets not forget that rear sump pan too
     
  16. 1 BAD 65

    1 BAD 65 Well-Known Member

    still can't find code

    Hey guys. I found the numbers on the intake and heads. It is a carter single 4 barrel, manifold has numbers B top then 1368782 with a 2 below it. The heads have number B-1374603-E. Need to find motor number. Where should i look? All the original lines are still there. exaust manifolds too. i will be taking the motor out this week, so if anyone wants it, let me know. I also have a slew of decent parts. glass, some chrome trim etc. let me know guys. Thanks alot for the help.


    Chad
     
  17. 1 BAD 65

    1 BAD 65 Well-Known Member

    Got The Numbers

    No, i got the motor from a guy named scott. The motor reads left to right
    LR 583 5H335445. The heads read B-1374603-E. The manifold reads 1368782. And a carter 4 barrel on top with the original air cleaner.The motor mounts come with too. So now if anyone is interseted let me know. original with 67,000 on it, does not look to have been touched at all. thanks and let me know if this is something that is of interest to someone. later

    chad :Do No:
     
  18. Page2171

    Page2171 Well-Known Member

    Sorry if I offended you, I was just in a goofy mood that day and felt like joking around. If I had a car to put the engine, I would actually be interested in it and it would be a pretty easy deal to make since I find myself up in your neck of the woods fairly frequently working on my mom's house in Appleton.
     
  19. 1 BAD 65

    1 BAD 65 Well-Known Member

    no problem man

    no hard feelings. if you know anyone that might be interested let me know. i will still be in the waukesha area for 2 weeks yet. i'm trying to unload the 401 and the 300 i have. trying to take as little as i have to up to neenah. i am willing to work with anyone. keep in touch. thanks man


    chad
     
  20. DugsSin

    DugsSin Well-Known Member

    One other site you might want to post is Yahoo groups Buick Nailhead. You will have to join in order to post but some of the Nailheaders over there don't like to come here. :confused:
     

Share This Page