#1235778-#1247885-#1235822 ONLY ONE LEFT IS #1235778 SCROLL TO LAST POST- THANKS All are long water pump pulleys. Media Blasted, etch primed and finish painted with Duplicolor High Temp Engine Paint (black) Asking $20 each plus Shipping cost. NEW PRICING , $20 SHIPPED CONUS EACH... Parts are in Southern NH. Thanks 4 Looking.....Jim/Rott Tapatalk User
The one on the left with the tie on it looks shorter I have the one on the far right and its to long hits the water pump ? what ya think I have a non air water pump short nose.
Ifya want I can measure the total height off the table and letya know tomorrow. I have no idea what the numbers correspond to or what your application is. Like I said, these all appear to be big car, long waterpump pulleys. Let ya know measurements tomorrow. Jim Tapatalk User
Measurements from left to right: #1235822 5 5/8" diameter 2 3/8" height -------- #1235778 5 5/8" diameter 2 3/4" height -------- #1247885 5 1/4" diameter 2 3/4" height -------- Lemme know, ty, Jim/Rott Tapatalk User
Jim, on the taller pulleys, could you take a measurement from the nose to the center of the first belt groove? I'm looking for a pulley just a tad shorter than the one I have. Thanks
Not sure on the other two but if this helps your customers #1235778 is for 1971 & 1972 455's with A/C and/or the Longer Water Pump shaft. I believe the other 2) may be for 350's ?
Thank you for that info. I have a 1235797 and it puts the belt right at 1/4" too far rearward. I need one that will be around 1 13/16 from nose to center of pulley groove. I don't know it that is achievable or not.
I may be able to help out but need to know a bit more about your combination 350 or 455 ? Short Water Pump or Long (Shaft) Water Pump ? What year motor are we working with ? Not trying to hijack this thread, just trying to help!
1970 455 engine. According to the measurements on the T/A website, it is a early short body. To line up the belt now, I have to space out the pulley 1/4". That leaves virtually no support nose for the fan mount. I don't think my current pulley would line up with the long nose either by looking at the measurements.
Maybe this will help...... 1970 Pulleys without A/C should be: Water Pump # 1375141 Crank # 1375142 1970 Pulleys with A/C should be: Water Pump # 1375146 Crank # 1375143 1971 & 72 Without A/C should be: Water Pump # 1238156 Crank # 1235779 1971 & 72 With A/C should be: Water Pump # 1235778 Crank # 1235777 71 & 72 Motors with A/C would have the LONG Shaft Water Pump .
Sorry for sidetracking your post Jim. Is it possible to measure the longer pulleys from nose to center of first groove closest to nose?
Ok , did as you asked... 2 longer pulleys are : #1235778 and #1247885 Measured from forward most spot on snout to center of 1st groove (facing front) : 1 7/8" on both pulleys. To center of 2nd (rearward) groove: 2 1/8" Hope that helps...........Jim/Rott Tapatalk User
Thanks for measuring Jim. Looks like they are the same as the single groove one I currently have. Too long, dang it! Thank you
Ok now I am totally confused but for the heck of it I will take the one with the short nose and zip tie in it send info for paypal Thanks Dan. gsxpress@sbcglobal.net