WANTED: Upper front control arm shafts

Discussion in 'Parts wanted' started by Eric, May 15, 2018.

  1. Eric

    Eric Founders Club Member

    Wanted: 2ea Front upper control arm "shafts" with washers and nuts...
    for 69 GS/ Skylark...I think their the same through 72 at least.
    Don't want the ones with the bolt that goes in each end which is probably some other year or chevy maybe.
    want the ones in the picture. 20180514_190555.jpg
    Thanks, Eric / Oregon
     
  2. Eric

    Eric Founders Club Member

    NOT these...whatever these are from. 20180514_190535.jpg
     
  3. BrunoD

    BrunoD Looking for Fast Eddie

    Hi Eric,let me understand,you don't want the all upper a arm,just the bolts?I have quite a few of the upper a arms,I'll check tomorrow as what they have,but I think I saved them complete with the bolts and all.Bruno.
     
  4. dl7265

    dl7265 No car then Mopar

    Chebby .
    Eric , are your threads stripped ? Or you just need your parts restored ?
     
  5. Jim Rodgers

    Jim Rodgers Well-Known Member

    Eric, just buy new.
     
    Eric and John Stevens like this.
  6. toymobile

    toymobile Retired knuckle buster

    Eric I have a pair, in N. Fl. shipping might be a killer.

    PM sent

    Johnny
     
  7. Matt Knutson

    Matt Knutson Well-Known Member

    I have some of those here.
     
  8. BrianTrick

    BrianTrick Brian Trick

    4580B342-BC20-452B-A6E9-DCE79E94AF18.jpeg I have the nuts & washers.
     
  9. Eric

    Eric Founders Club Member

    I Just want the shafts...not the whole control arms...just the shafts, washers and nuts.
    Brian...how much do you want for those nuts and washers?
     
  10. Eric

    Eric Founders Club Member

    Johnny...do they have the washers and nuts with them?
     
  11. Eric

    Eric Founders Club Member

    Brian...if I remember correctly ...it seems to me the washers are slightly concave or am I imagining that? Are those washers in your picture flat or?
     
  12. Matt Knutson

    Matt Knutson Well-Known Member

    Here is one of the ones I have ... special washers should be concave.
     

    Attached Files:

  13. toymobile

    toymobile Retired knuckle buster

    yes, still in the control arm.

    johnny
     
  14. eric6659

    eric6659 Well-Known Member

    I have a good used pair of shafts if you still need them..
     
  15. AzChevs

    AzChevs Well-Known Member

    I like to back everyone with a pair of shafts that are cleaned, painted including nuts and washers for 45.00 shipped. They were wrong for a Chevelle, which you showed in the second pic.
     
  16. CARHEX1

    CARHEX1 Founders Club Member

    I have a few sets 20 each and shipping is 14 bucks f;at rate for as many will fit in the box. if it gets to me
     
  17. Eric

    Eric Founders Club Member

    Took your advise Jim Rodgers...purchased new ones last night on ebay...thanks all for your help and input!
    Eric / Oregon
     

Share This Page