Wanted 70 driveshaft

I am looking for a nice 1970 GS 455 TH 400 with 8,2 rear driveshaft.
not the 71-72 with the 8,5 is not the same.

Thanks
Nelson

 

The 71-72 will be shorter due to the different rearend.

 

I probably have one, if you can come up with the length, from the center of the front u-joint to the center of the rear one. I'm in the middle of moving my parts and my interchange book is packed away "somewhere". Thanks, Bob.

 

The GS T-400 center to center length for '70 is 55.10" and for '71 is 54.241. I got this info from '70 & '71 Assembly Manuals.

Matt

 

Matt,
thank you for the help.

Nelson

 

Is that the two piece shaft?

 

No. It should be a 1-piece shaft.

 

Would a '69 shaft be an option?

 

Don't know, maybe take a measurement. '70 is 55.10" info thanks to Matt

 

ttt

 

Just about 100 percent sure I have a '70 & '71. GS455 / Turbo 400/ 8.2 and 8.5 respectively. Where you located?

 

I am in Mich

 

I will dig them out of my crawl space and take some side by side pictures and measurements. My wife and I might take a road trip your way in the next two weeks. How soon you need it and are you willing to drive somewhere near Detroit area / I-75?

 

Sorry, don't have a 70, I have 2 LOL

 

One on left is out of a 70 GS455 burgundy convertible an the other is out of a bamboo 70 GS455 hardtop, both cars had been off the road a long time before I parted them out. They appear identicle. We'll figure a price for both as soon as you tell me if they can be delivered.

 

Update. Both driveshafts will go to the scrapper. Thanks

 

I most likely have one,but shipping will kill you.Your best bet is to find one locally.Bruno