WANTED: 4 speed consolette fastener hardware

Discussion in 'Parts wanted' started by STAGE III, May 2, 2017.

  1. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    4 speed console or consolette metal clips that hold the top and bottom halves together, pit free cup(also same as some automatic car console tach housings or tri-shield housings). PM me with those ,rings or other odds and ends
     

    Attached Files:

  2. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

  3. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

  4. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

  5. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    Rumpidity rump Bump
     
  6. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    To deeeeeee top
     
  7. wheelz

    wheelz 'B' is for Buick.

    Yo 21st Century Fritznoid Maaaan, Troy now has my consolette metal clips that hold the top and bottom halves together...hopefully He will manufacture a few sets... Try ta contact him!

    and yessss, I have a VERY NICE, D E R N NEAR pittless tachCUP...
    (much more rare than a pittless hikcup!) o_O


    Wheelz, Tampa Bay
     
  8. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    Cool, thanks for the heads up buddy boy : )
     
  9. Buickman1967

    Buickman1967 Well-Known Member

    The PartsPlace has the upper console boot ring and lower console boot ring

    (1965 - 1972) Skylark/GS/Regal/GN -- CP1234S--Console, Shifter & Related Parts-SHIFT BOOT-4 SPEED SHIFT BOOT RETAINER FOR SHORT CONSOLE (MOUNTS UNDER CONSOLE) - EA US$19.00
    (1965 - 1972) Skylark/GS/Regal/GN -- CP1011S--Console, Shifter & Related Parts-SHIFTER BOOT AND RELATED ITEMS-SKYLARK & GS UPPER BOOT TRIM BEZEL W/ CONSOLE - MANUAL - EA (THIS IS THE NEW UPPER CONSOLE ALUMINUM TRIM BEZEL FOR MANUAL CONSOLES. THIS PART IS COMMONLY MISSING) US$69.00
     
  10. STAGE III

    STAGE III Lost Experimental 455-4 Bolt Main Block.

    Thanks Buickman, appreciate your going to the trouble to copy and paste that.

    I am just looking for original odds and ends to collect (no hurry) to piece together a rough consolette I have. Big parts (base) to little nuts and bolts and slide parts that hold upper and lower consolette sections together. I am sure there are some guys out there with odds and ends from an aborted 4 speed conversion etc that they are never going to use so will just keep looking till they see the ad : )

    Thanks again.
     

Share This Page