Used 455

Discussion in 'The Bench' started by Chris Cornett, Feb 5, 2003.

  1. Chris Cornett

    Chris Cornett Well-Known Member

    My brother and I spotted a 72 Riv in a junkyard. The guy at the yard wants $350 for the motor. It appears to run good and is all there. Is the price fair. I thought so. My brother is thinking about getting a 455 for his 69 GS400. This motor seems to be a good candidate for a rebuild. How about some input. Thanks guys
     
  2. 73-462GS

    73-462GS GS Mike

    Doesn't sound too bad. Maybe a little high. Make sure you get all the brackets and throttle linkage. There are some guys on here that get them cheaper but if it doesn't have a cracked block and it runs it should be ok for a builder. Mike D.
     
  3. Larry Gibson

    Larry Gibson Platinum Level Contributor

    Chris,

    I sent you a PM about a 73 455 plus Stage 1 heads and a new cam that I have available. Did you get the PM? If not let me know and I'll post the info.
     
  4. Chris Cornett

    Chris Cornett Well-Known Member

    Larry you have a PM
     

Share This Page