These are the tubular upper control arms that i installed to avoid beating up the headers. they clear the headers nice but i would not use them on a street car. Look at the shims that had to be put in to straighten out the car :jd: The car spent 18hours on an alignment rack. o No: Thanks Dustin
Dustin, take a look at the Globalwest arms, specifically with the offset bars. These will allow 1/2" offset of the arms w/o the need for shims. It very much corrects the problems with the stock bars used with your arms here.
i have looked at the global west arms. the price is a little high right now. i have about $110 into these is all that includes ball joints. so for right now that will have to do. I plan on stepping up when A. the money is there or B. i have to because the car is so fast :beer hopefully the latter. Thanks Dustin