True Trac

Discussion in 'Got gears?' started by agetnt9, Jan 5, 2018.

  1. agetnt9

    agetnt9 Agetnt9 (Dan)

    Anyone know what the torque and type of lock tight is to hold the true track 10 bolt carrier is?
     
  2. BrianTrick

    BrianTrick Brian Trick

    Ring gear bolts = red locktite,65ft/lbs
    Carrier caps = soaked in oil,65ft/lbs

    Is that what you need?
     
  3. agetnt9

    agetnt9 Agetnt9 (Dan)

    There are 6 bolts on each side of the carrier to hold it together. One is missing, Thanx, Brian
     
  4. BrianTrick

    BrianTrick Brian Trick

    I would wonder why it is missing. I have a card for those somewhere. I think it has that spec.
    Or just call them and ask.
     
  5. agetnt9

    agetnt9 Agetnt9 (Dan)

    Don't know, got it from Monza a few weeks ago, and am having a problem with this shipment of stuff. can't seem to get **** done.,
     
  6. monzaz

    monzaz Jim

    45 ft lbs. it is a 3/8 bolt 24 thread count... Lock tight it . Lock tight is on the bolt already.
    Order was over the Holiday.. .Axles were delayed by Moser... Nothing I could do hands were tied. Very sorry. Jim
    Bolt was missing from the true trac body...??? Do not know why? Stuff happens. ??? No excuses just tried hard and did not happen as smooth as we all wanted.
    J D Race
    Jim
     
  7. agetnt9

    agetnt9 Agetnt9 (Dan)

    Ok, thanx
     

Share This Page