TA A-Body Tailpipes

Discussion in 'Parts wanted' started by Bigpig455, Dec 2, 2018.

  1. Bigpig455

    Bigpig455 Fastest of the slow....

    this is a longshot, but does anybody have any TA 2.5 mandrel bent A-Body tailpipes they want to get rid of?
     
  2. BrianTrick

    BrianTrick Brian Trick

    I don’t have the TA’s,but I have a new pair of Flowmaster 2.5” tailpipes. They have a slight bend,about a foot before the bumper,instead of a sharper bend at the very end. Each of them are two-piece for adjustment.
     

    Attached Files:

  3. Bigpig455

    Bigpig455 Fastest of the slow....

    thanks Brian - I was looking for the TA's for the shape and contour of the downturn, but those get you most of the way there....I'll PM you to talk price if I cant find a TA set.
    Thanks
     
  4. greggzy71x

    greggzy71x Well-Known Member

    i have a whole TA 3 INCH system flow masters its only 3 years old with 2000 mi on it from sunny san diego from the factory manifolds back GREGG D 732 406 6285
     

Share This Page