Speedo Cable Length

Discussion in 'U-shift em' started by sriley531, Feb 18, 2015.

  1. sriley531

    sriley531 Excommunicado

    Hey Guys,

    Did some searching and didn't see an answer for my specific application.

    Anybody know what the speedo cable length should be on a BBB/Muncie with the cable connector on the DRIVERS SIDE of the trans should be??

    I know a lot of these were passenger side and with or without adapter, but mine is on the drivers side.
     
  2. sriley531

    sriley531 Excommunicado

    Nobody?? You guys gonna make me guess??!!
     
  3. agetnt9

    agetnt9 Agetnt9 (Dan)

    For some of use it is way below the -0 in temp and cant get to the cars. Also is this for a gs, 225, or what year? i thought that all came on pass side myself 70-73
     
  4. sriley531

    sriley531 Excommunicado

    Its minus 5 at my house right now so I know how that goes. Just thought somebody might know off the top of their head (as so many knowledgeable folks on this site do!)
     
  5. mrolds69

    mrolds69 "The Cure"

    Look at "similar threads" below this. Looks like about 69".
     
  6. sriley531

    sriley531 Excommunicado

    I did a search and found a few that said 68"-72", but they were all in transmissions with the port on the passenger side. Couldn't find anything on transmissions with the connector on the drivers side. At this point I'm thinking of gambling on something in the 62" area and seeing if I can make it work
     
  7. copperheadgs1

    copperheadgs1 copperheadgs1

    Shawn, you cannot find anything on this because your trans came out of something else I would bet. Assembly manuals are your best reference for things like this and all the assembly manual info shows all applications at least in 70-71 GS were passenger side attaching.
     
  8. sriley531

    sriley531 Excommunicado

    Thanks for the reply. I actually installed it about an hour ago. I took an educated guess and went with one that was 61" and it fit up quite nicely actually
     

Share This Page