Skylark to GSX replica

Discussion in 'Members Rides' started by Harry, Apr 5, 2011.

  1. Harry

    Harry The Hammer

    Thanks for the encouragement gents:beers2:

    If things go very well it might be ready by mid to late summer but I'm not getting my hopes up.

    The front rims are 15's standard width(forgot the width :Dou:) with a 235 60 series tire,I should have went a couple of sizes taller to fill out the wheel-well better

    The rears are 15'sx10'' wide with a 295/50 series tire,off-set is 5-5/8''.Thanks goes to the board for the rear-offset numbers,it's a very tight fit to the shock mount.I like how these cars swallow up a big tire,I could have went taller no problem

    [​IMG]



    This week-end did a trial fit of the wheel-well trim & rocker panel(s) moldings plus drilled out the fenders for the WARNING BADGES:Brow: which we managed to get on straight(I think?) despite too many wobbly pops to be doing such a task.The stainless fender trim is a bitch to work with,almost kinked one,was hoping for a better fit than we got but over-all it's not too bad

    [​IMG]
    Anyone know a good pin-stripe that will match the rocker panel molding red?

    [​IMG]
    [​IMG]
     
  2. MattRush10

    MattRush10 Buick Fanatic In Training

    Those meats in the back look amazing! I looked, but I didn't see- what color are you planning on?
     
  3. william.ali.kay

    william.ali.kay Needs more cowbell!

    Any new :kodak: ?
     
  4. Harry

    Harry The Hammer

    Finally started working on the car again & pulled the body off the frame today.Didnt expect to find a build sheet but there it was on top of the gas tank under the mat,very surprised at how good of shape it is considering the climate around these parts.
    I wonder what's up with the extra anti-freeze? V48

    [​IMG]
     
  5. Doo Wop

    Doo Wop Where were you in '62?

    Extra anti-freeze supplied cause it's a Canadian car, my guess.
     
  6. 69chevelless3964speed

    69chevelless3964speed Active Member

    You did a great job! She looks saa-weet!
     
  7. Harry

    Harry The Hammer

    Frame sand-blasted & powder coated midnight black,new big block springs(frame now sits 1 1/4 inches lower than with the 350 springs),new A-arms,new steering components-69 chevelle box,front disc,H n R Parts rear-end set-up,1/2 inch fuel lines & new brake lines as well.Floor pan & firewall painted but no pics of that yet but I will soon.Planning to drop the body back on tomorrow if we can find a few able bodies for lifting.

    The Old
    [​IMG]
    [​IMG]

    The New
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  8. staged70

    staged70 RIP

    Looking great but for GODS sake leave the rocker chrome off behind the rear wheels no GSX or GS had those just Skylark Custom unless you like them that is:) Where did you get the tires I really like those
     
  9. Double "D"

    Double "D" GEAUX SAINTS

    Very nice!! I wish I could do this with mine :cool:
     
  10. Harry

    Harry The Hammer

  11. 2791 lark custo

    2791 lark custo Gold Level Contributor

    x2
    Looks really nice!!!
     
  12. 72buicklt1

    72buicklt1 Well-Known Member

    subscribed:TU:
     
  13. cjp69

    cjp69 Gold Level Contributor

    Nice work Harry!
     
  14. cpk 71

    cpk 71 im just a number

    Sweet job Harry!!!
     
  15. Harry

    Harry The Hammer

    Thanks again for the kind words gents it keeps us motivated :TU:

    Had a hell of a time trying to find the code for Saturn yellow,never did,so I took in a 1:18 scale model of a GSX & had the paint scanned at the local supply shop.I have never seen a GSX in person so I dont know what the yellow is even suppose to look like.

    All I know is this yellow sure is loud..I like it!
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  16. rkammer

    rkammer Gold Level Contributor

    Really looking forward to seeing more pics and info on your restoration. It looks fantastic! Too bad you had trouble locating correct Saturn Yellow paint code. It's relatively easy to obtain and many on this form could have given you the correct dietzler or PPG codes. But, no matter as the paint work is done anyway. Keep the pics coming.
     
  17. Harry

    Harry The Hammer

    I did try about 6 codes from this forum & we always came up empty handed but like you say no matter as I like it & I'm not going after a correct nut & bolt restoration anyways.

    Just want a kick-ass Buick street/strip machine.
     
  18. 2791 lark custo

    2791 lark custo Gold Level Contributor

    I am sooooooooooooooooooooooooooo jelious. That is a great car you are building. You could have found the codes here on the Color is everything forum by searching it, but it looks like you are right on even without it. Thats an unbelievable amount of work you are doing
     
  19. Oldskewl59

    Oldskewl59 Gold Level Contributor

    Your car is over the top. Lots of very cool stuff. One of the best I have ever seen. I think evrybody is looking forward to seeing this car finished.:TU:
     
  20. Harry

    Harry The Hammer

    Greetings All

    FINALLY the car is on the road!! Its had a few issues though: The trans went kaput-case problem.The new gas tank sprung a leak from one of the small vents tubes because of piss poor soldering job.Other than that its been good

    I would like to thank all the members here(you know who you are) who provided me with guidance & parts.True Buick Class Acts!!!

    Here are a few pics.I plan on taking some better quality ones in the near future,I also plan on posting some KILL stories

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    ---------- Post added at 12:15 PM ---------- Previous post was at 12:12 PM ----------

    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    ---------- Post added at 12:18 PM ---------- Previous post was at 12:15 PM ----------

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    ---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     

Share This Page