SBB 350 stroker build

Buick#455 · Feb 17, 2020

Fox's Den said: ↑

Derek, take a chill big guy, I know you have big ideas but I got to tell ya we are lucky to even have the 'aluminum heads and look, now a SP3 intake and we have been waiting for these parts for a long time now. But I got to tell ya all the craziness about stroking and Honda bearings nascar take out rods and such hardly anyone is going to try this route unless they have some cash and a motor or two in case something happens.

there are enough parts now to build a really good strong 350, heck I wish I had all this when I built my motor damn thing would have 500hp and be radical as all get out. And hit 10's on that nitrous. I only need to knock off .82 sec now to go 10.99

How about giving people what they want and that is some good ideas on what we now have available. No crazy stupidcrap.

Heck, I have gotten into the 11's with my motor on nitrous and that 125 shot is not really that big. Someone should be able to surpass that easily with a hot 350 and a small amount of juice.

You guys want to Procharge or Turbo go ahead, but I have seen a lot of guys burn up their motors because that tune was not quite right, and if you are not sure of what you are doing and have to ask all the time, well you should go get a book and get more knowledge on these systems.

Putting around town and stepping on the gas downs not get it, go out and stomp on it and run it up to a Buck 10 and let me know how you feel then, and if it goes sideways grab second and stay in it, get the sh*t out of your drawers and stay in it wussies. lol

I did a lot of reading before I put that nitrous kit on and I still managed to burn up two plugs trying to go with a 150 shot using the standard TA intake. I have not tried to go past my current 75 shot since I feel a 12.31 Q mile is pretty good on my old motor.

So forget this stroker garbage and go a different route it ain't going to do a darn thing for the motor but cost you more money and what if you blow it up then what.

But like they say, different strokes for different folks....

G out.
Click to expand...

Personally Guy, I like my stroker turbo garbage. And Derek thanks for the advice on my stroker build. What you did was help me with the math to get it done. You however did not build it, I did. You did not machine the block or grind the crank, but you helped with the math to get it done. I ordered the forged pistons. I assembled the block. I didn't like the way the nascar rod bolts fit, so I added arp bolts. But once again I thank you for your help. The names Murphy if you have an issue with me & need to call me out.

sean Buick 76 · May 8, 2021

Bump

Log in or Sign up

SBB 350 stroker build

Buick#455 Well-Known Member

sean Buick 76 Buick Nut

Share This Page